niteparts 4a-w58 bellhousing w55 fork's

[fixeruperer]

i wish haha,
i havnt kept looking, but i always keep my eyes n ear out, for just in case i come across it.

im going to have to use the on i got which is the longer one. but i would like to find the smaller one.

try hitting up brenden from niteparts, you might have better luck.

[AE3SGTE]

Yeah I have contacted Brendan a while ago, he didn't give me part numbers, but just stated to use W/G series parts.

There is a post on AE86DC forum showing a short fork, but its too short.
I believe he has just used w55 clutch fork that came with his box.
http://www.ae86drivingclub.com.au/fo...805#post977805

Did you remove the picture of yours that was on the first post?
Yours is too long and his is too short.

w55 style forks can be found on the following...
notched = M, K (km36 G52), K A & T (only from 22spline T50), (shortest type) approx 113mm pivot to clutch slave
straight = T (3tgte), G, C (ce71), (middle type) approx 118mm pivot to slave
bent = R, S, C (cr30 G52), (longest type) approx 125mm pivot to slave.

Based on what I see and have read, the Straight type/Middle type should be the one.
Just not sure about the CE71 listing on TOYODIY, if you cross reference the part number a tonne of models show up.
And in there listed is KE70...to me it can't be, ?KE70 is a cable clutch....so wouldn't the fork be different?

[AE3SGTE]

I ended up just buying the correct parts from Niteparts.
I still have no idea what part number are.

[fixeruperer]

haha yeh they like to keep that shit secret.
i will, one day. find this part number.