I have both plugs and the sockets in stock if you need them.
http://docs-asia.electrocomponents.c...6b811aedd1.pdf
have a look at the manufactures catalogue find the part number and search RSonline the connectors are "040/070 Series Hybrid I/O" starting on page 33.
the number after the - is for colour
6 = Grey
7 = Yellow
http://au.rs-online.com/web/p/pcb-co...ings/7201086P/
I have both plugs and the sockets in stock if you need them.
i've hacked my loom up already anywaybut it is useful to know for future installs!
slight thread hi jack, anyone know if you can buy alternator plugs and pins?
ive got a wire that the insulation has been stripped back and would like to just replace the whole plug?
1990 ST185 Running stock Gen 3 power, 216awhp at 15psi. 13.6 second down the quarter
a second thread hijack. looking at maybe doing a patch loom for my instrument cluster. but it doesnt seem to use these types of connectors. the cluster itself has a printed circuit which the connectors sit on top of. it's a weird setup:
http://carpron.com/multisite/d/37734...lusterback.JPG
considering the female side doesnt actually have any pins etc on the stock setup, would there be something available to make a patch loom with? or not...
I highly doubt u will find female plugs for those dash plugs
hey Sam Q do u have new female sockets for the 11 pin Toyota plug
in the rs components catalogue u cant get a single female 11 pin connector
the 11 pin normally is with an 8 or 6 pin next to it
if u have brand new 11 pin female connectors and the back of the terminals sticking thru the rear ill buy some off u
thanks
Bookmarks