1ggte help please...

[MOPO_PERFORMANCE]

I know this might be be a piece of history to a lot of people now, but I have recently conducted a 1ggte in ra65 conversion that I've had sitting around for a very, very long time. It was all sitting there so that's why I've done it. Its a gen 3 1g.
Mechanically its all done, but I need wiring help. I've searched and searched and yes found plenty of 1g info, but cant find any ra65 diagrams. I'm hoping someone can tell me how to wire up these plugs-
photo 1(4).JPGphoto 2(4).JPG

I need to know how to wire these 2 plugs together.
The 2 square ones will connect to each other, and I know I need to reconfigure the pins, but to what??
As for the longer plug I have no idea, I assume they are for cluster items and lights, but which ones go to which?
Does anyone know or have specific pinouts for each?

I then have one plug left over in the engine bay, near the coil, what is this and how do I hook it up?
photo 3(3).JPGphoto 4(2).JPG

I know this conversion has been done numerous times, so somebody must be able to help me out. Even if you dont know the pinouts, someone might be able to take some pics for me?
Any help is much appreciated, cheers Marc

[MOPO_PERFORMANCE]

Anyone? Anything?

[SillyCarS]

Dunno about the ra65 but i just found ignition and starter from the key barrel to wire my microtech... not sure if that helps but there is a section on the forums with various wiring diagrams