Hey guys,
I recently bought an MZ20 with a 2jz conversion, in order to connect the drivers side coolant outlet at the back of the 2jz to the heater core inlet the previous owner whipped up a couple of L bends, a large U bend and hose clamps .. anyway, the large U sits about 100mm higher than the radiator cap and is creating an air lock so i need to replace it.. I have been told that a jza70 hose should suit, are the rear coolant outlets on 1jz's the same or very similar to the 2jz's?
if someone has could grab a snap of the hose on a jza70 i'd really appreciate it.
Cheers guys.
I'm digging this back up.. Any jza70 owners out there..
Bookmarks