Stick with 2", it's more then sufficient for a stock to mild motor.
Hey all,
I was sure on getting a 2.25" press bent exhaust but my usual exhaust shop recommended against it, particularly due to keeping the drone down (as well as the volume too) and recommended going 2" instead. If i'm not mistaken most of the exhaust looks like its already 2" so it may not be much of an upgrade.
His recommendation was to go with a redback style straight through muffler, a reasonable sized hot dog resonator and 2" press bent piping (can't afford mandrel bend)
ZZT-231 Toyota Celica SX
Stick with 2", it's more then sufficient for a stock to mild motor.
Thanks
Theres quite a bit of info online, most pushing towards 2.25" and some say 2" so its hard to know what to take in hehe. I'll take your recommendation
ZZT-231 Toyota Celica SX
id be goin for 2.25 to counter-act the press bent angles.
Current: 94 jzs147 aristo, 92 ep82gt starlet
Prev: ma61, gz20, jza70, uzz31, ncp10r, 92 sw20r
And the winner of the big car race is......HOT ROD ZOIDBERG!
2.0 will be plenty mate. The press bends will make a bees dick of difference.
Bookmarks