Need help. Mx83 manual swap what pedal!?

[Slidin23]

So I have searched and searched and have come up with multiple options on clutch pedals to use with this swap.
I have a 1jz in the car which I'm pulling out this weekend to do the head on. And want to wack a manual pedal in for when I do the rest of the conversion in a few months.
Now what pedals give the best results?
Have seen people using ra60/ma61 pedals. Ma70 and even Camry.. Can someone link me to a thread with a full write up and pics or just show me a pic of their one? I plan to leave the stock brake pedal and just chop it.

Cheers jake.

Sorry but I have searched a lot and am really confussed about what to use. Don't wanna spend a shitload getting the wrong pedal!

[MRZ]

I haven't done the manual swap myself but a member on here has done it to his car. Link Credits go to dnegative.

[Cuzzo]

Gx81 is the only proper way.

Mine cost me 300

You can use the ra65 pedal with some fab requires for the top bracket. I had to use a larger master to give me enough travel also.

[Slidin23]

Yeah I tryed to get hold of a gx81 pedal first. Toyota has discontinued them though.. Anoying as I wanted it to be all factory with no screwing around.

I got a ra65 pedal master and hard lines tonight and put it in roughly.

Everything apart from the top mount seams to line up good! I'll mod the top mount tomorrow and fit it in! This seams the best option!

Cheers for the help guys!

[J0RD0]

http://www.ae86drivingclub.com.au/fo...-pedal-box-kit

I hear this guy does some pretty good work

[cresslux]

early 90's camry. the model after the sv21, cut a tab off and it fits. camry master works fine with an r154 as well.

but defs try and get a gx81 pedal, i have one with a land cruiser master to use my twin plate.

[greg]

I also used the gx81 pedals for brake and clutch for the 2jzgte conversion . they are worth sourcing ,they make the conversion so easy.good luck with it .
Cheers Greg.

[dnegative]

Just dont come up for sale as they are all installed in cars, nill stock in Japan too.

[japlish]

make sure you use a 3/4 master cylinder (landcruiser) i have a gx81 pedal setup with an R154 and the 5/8 master had the clutch releasing near the floor.