http://www.toymods.org.au/forums/tec...ml#post1155045
Posted some here mate. Not sure if it's what you're after?
Does anyone have wiring diagrams for TA22/23 & RA23/28?
I've searched this thread and could not find anything...
http://www.toymods.org.au/forums/tec...ml#post1155045
Posted some here mate. Not sure if it's what you're after?
1977 RA35 Celica GT - I4 | 2007 GSV40R Aurion - V6
Don't live life being scared of death, live in the fear of not truly living. RP 2012
Thanks, +rep!
edit: soz, I've given to you too recently lol
i'm working on a 3SG BEAMS . all the wiring data is posted on my business web site..liink below
if anyone has any other relevant 3SG BEAMS info, please post up a link.
Toyota
I have this one:
can you tell me where this came from???.
Not a clue sorry. I have over 1.5 gig of miscellaneous manuals, diagrams and pinouts that I have collected over the years. I can stick it all on a DVD for you if you want to see if there's anything you need.
[edit] Actually, here you go. Here's a higher resolution version of the one I posted:
http://www.mr2forum.org/forum/index....bo-ecu-pinout/
And another link that may be of interest:
http://www.mr2.com/forums/beams-owne...-compiled.html
[edit 02]
Oh oh oh, and check out this link too...
http://www.beams-redtop.com/index.htm
Last edited by TERRA Operative; 04-03-2012 at 11:22 PM.
Does anyone have the wiring diagram or more importantly the ECU pinout for the3VZ-FE, VCV10? The manuals and pinouts listed here are all for the 1MZ-FE.
Thanks.
Edit: Found it in this manual... http://www.mediafire.com/?i2ottigmy58
Last edited by worldwalker; 22-03-2012 at 03:53 AM.
Beaten, but whatever.
cool
havnt seen them before
Last edited by dumbass; 23-03-2012 at 12:34 AM.
Hi,
Anybody got any wiring diagrams for a 95 Aristo V8?
Thanks
Lextreme might have something
If the ecu has big 80 pin plug and smal 40 pin plug
Then they r pretty basic to do
It's a 1991 Aristo, and in Japanese, but it is the 1UZ-FE, so should get you started.
http://img220.imageshack.us/img220/5...19911uzfe1.jpg
http://img827.imageshack.us/img827/1...19911uzfe2.jpg
http://img442.imageshack.us/img442/2...19911uzfe3.jpg
http://img7.imageshack.us/img7/4924/...19911uzfe4.jpg
http://img406.imageshack.us/img406/1...19911uzfe5.jpg
Thanks.
Lextreme don't have any wiring diagrams for the Aristo.
Speedy's_6 in fact they have something that's close enough. What pin configuration is your ecu?
USSR GAZ24 with 1UZ-FE VVTi (UCV24) http://www.toymods.org.au/forums/showthread.php?t=60301
Engine conversion is when you drive a shitbox which costs a whole LEXUS to own
Bookmarks