Yeah, I'm pretty sure the ones I have are aroundt the 250kb range.
I have shrunk the originals a while back too. Much easier to view and only a 200 or so KB's each now. I'll email these one's to you.Originally Posted by CrUZida
Yeah, I'm pretty sure the ones I have are aroundt the 250kb range.
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
Thanks guy's these will definitely help someone. Keep up the good work.
have scanned up the AE86 factory detailed Electrical Wiring Diagrams Book (1983) as well as the factory 4AGE TCCS Diagnosis Manual. Both have been my bibles for the last few years. Very useful.
Both are on this site in PDF
http://www.aeu86.org/viewtopic/facto...osis-ma/t/4161
The mac people froze my downloads as it was getting downloaded too much, but AEU86.org offered to host them.
Last edited by parrot; 26-01-2007 at 11:58 PM. Reason: correct link
Ok who out there can get me the wiring diagram for a MX-62 Cressida with 4 spd auto and 5M-E?
Cheers Brett.
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
I couldn't find a really clear ECU Pinouts for the 1GGTE 3rd Gen models so I spent a few minutes with the .PDF that CrUZida posted on the previous page. Hopefully it's Legible to everyone.
http://myweb.cableone.net/bell7474/1...ECU Pinout.rtf
P.S. If a wire has more than one input/output I tried to list both, also the numbers in () are the the input pin for that connector so ...
1. VC AFM(4) TPS(4)
Would be ECU Pin 1 goes to pin 4 on the AFM and TPS pin 4.
Please PM me if you find any errors on this list.
Sorry to dissapoint but the 18RGEU pinouts are WRONG
try here... its excel 2003 format
http://web.aanet.com.au/northenspire/images/18rg
ON HOLD Current Project 1UZ-FE Powered Buggy
Last Project 18R-GEU time to tinker
EDITED ITS ALL VERY LAMO
no disappointment here Phil - i've been working the wiring out for the last hour or two and worked out just about EVERYTHING to do with 18R-GEU wiring on the net is wrong!!
I'll post up my revised notes and diagrams once the car is running and i've slept.... tomorrow perhaps
...... butt scratcher?!
Mate if you need any help buzz me... i had to send the ECU away to be tested and remove the co2 sensor and asked them to supply a wiring schematic. and they did... thats how i came up with the excel doc.
i do have the actual schematic they sent me if you wish
cheers
ON HOLD Current Project 1UZ-FE Powered Buggy
Last Project 18R-GEU time to tinker
EDITED ITS ALL VERY LAMO
phil, can you possibly email that schematic to me again?
thewitzl AT optusnet DOT com DOT au
it looked the goods
...... butt scratcher?!
AE86 (including 4AGE) wiring diagrams linked to here
Hen
If you're going to rip off my work you could at least put the original high quality PDFs up, they took me two days of pretending to work to complete...Originally Posted by BEV051
originals located here!
http://khi-santh.canberracelica.org/ (then click on the wiring diagam link)
Also it's a TA22 wiring diagram with a 2TGEU.
Last edited by Invid; 13-02-2006 at 08:11 AM.
1972 TA22 2TGZEU - Now with Z Powaaah! (Go, go Gadget Torque!)
See pics on http://sebastianbecher.com.au - In the automotive photo gallery
Proud supporter of the http://www.canberracelica.org
Bookmarks