Hi guys & gals.

Im in the processs of converting my 22r to efi, have all the gear bar one important component. The manifold is installed an all bolted up, easy as just a bit tight against brake booster
My problem is the guy i bought the kit of didnt include the 14p connector to 3 plug ecu or wiring for the connector, the connector i got from a car we wrecking at work ( Parts wrecking at 4wd dismantler ) but it was a rodeo so the wiring wouldnt work. Im enquiring if anyone has done it or think its possible to wire up the power connectors an other neccasary pins to be able to use the stock ignition barrel to start the car.

Any suggestion would be much appreciated, i have cracked open the ecm to work out witch pins i need to wire up, from what i can tell it was out of a 4wd ( 4runner or lux ) had a pin for 4wd.

Cheers guys