they are just for show .would disturb the air coming into the trumpet
better off getting a airbox made around the ram tubes
Spotted these the other day. I like the idea of what looks like a proper internal air filter inside of the trumpet. Keeps the naked trumpet look without those ugly socks and should filter better then those screens that only stop birds from being sucked into the engine.
sstp_1102_21_o+ford_rtr-x_mustang+part.jpg
Anyone know if these are available anywhere?
they are just for show .would disturb the air coming into the trumpet
better off getting a airbox made around the ram tubes
I think the Naked trumpet look was what was more enticing about theseI like trumpets but only when there is nothing covering them, Sock filters look ugly.
NooB 3TGTE swapped RA40
✨Rahgo2:Turbo Boogaloo✨
Back Burner: Kaido Racer inspired MA45 with 1GGE, a 4TGTE I need to stick in something, and an 18RE.
Trying my best to keep Toymods forum alive.
The Ramflo ones aren't too bad mate, they're still socks but at least they're nice looking ones, and you can colour code them too.
The other option is to go on ebay and have a look at those filters that sort of clip on the front of the ram tube flange- like a mesh cap.
The Smurf: A 1972 TA22 with a 2TGEU, individual throttle bodies and a bad attitude.
well with open ram tubes sucking in dirt and grime motor would need rebuild every year if it lasts that long
in the old days of group c touring cars motors were rebuilt after every 1000 kays because of this
.also doent take much for it to suck in a stone
Yes but I think that was originally what this thread was about, Those filters would still protect the engine while showing off the sexy trumpetsSure they mess with the flow, But so do socks, These just look a hell of a lot kooler!
NooB 3TGTE swapped RA40
✨Rahgo2:Turbo Boogaloo✨
Back Burner: Kaido Racer inspired MA45 with 1GGE, a 4TGTE I need to stick in something, and an 18RE.
Trying my best to keep Toymods forum alive.
The Smurf: A 1972 TA22 with a 2TGEU, individual throttle bodies and a bad attitude.
this seems to be the only decent slide on filters out there:
RP605/4 - 150mm/6" Rally Pod 65mm I.D. 95mm O.D. | RP605/4
Not exactly the same but a good DIY effort.
DIY Quads Air Filters / Filter Screens
Bookmarks