keep them on the car use a fork and bash the hell out of them, it will ruin your ball joints
![]()
I need to remove my SA63 knuckles, drill them out, and fit them to my MA61 for extra drift and such.
But I can't get any of the four knuckles off!
Step 5 on this page --> MK2 TSRM On-Line
Is there a trick to this? Am I missing something? They just won't budge.Using a press, disconnect the knuckle arm from the lower arm.
It's driving me crazy, I've been at it for a few hours now...
keep them on the car use a fork and bash the hell out of them, it will ruin your ball joints
![]()
- ma61 + 2jz-gte + v160 + 3.5 torsen
Hit it hard with a hammer along the length of it, and it will just 'pop' out.
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
*hearts* his 4age powered KE70 Panelvan!
Hi, Im enthused about corollas..
Cheers for the suggestion Cruzida and Aust162, I did finally get them out late yesterday in a similar fashion, ended up using a 'stardropper' hammer thing and hanging the knuckle/LCA over a rock ledge in the yard
This totally deserved more than 11 words in the TSRM.
I just hook a crowbar or spanner under it, and belt it with a hammer on the side.. Usually takes only 1 hit
Bookmarks