If I have the wiring ready in the next few days, I a definite. Looks like a great day to test and tune the car.
If I have the wiring ready in the next few days, I a definite. Looks like a great day to test and tune the car.
http://www.toymods.org.au/forums/showthread.php?t=57986
Hillclimb, Special stage, short circuit. long circuit. Four layouts, Five rounds over two days.
www.ultimatetrackdaychallenge.com.au
Winton: 1.37.4/Wakefield: 1.08.1/Eastern Creek: 1.48
$$$ for both nights transferred. happy to give you "instructional" driving demonstration also dneg (let me flog your car and try beat your laptime... )
I'm out. Just back from 6 weeks holidays. Car needs some paint, injectors (ordered), new turbo (ordered), and a new turbo manifold made up (not ordered) and a tune.
Will be out of action for a while, but the power was (or at least felt) seriously down. Still pulled a 1:08 last day tho
Paid for 2!
Cheers
Bagged Gs430 Daily
Ra23 Cruiser
Money is showing Seb, just not cleared yet. Looks like a good group of cars coming together for this one. Dneg, not quite there on pelican numbers, only you, me, hocker and vito at this stage. In town has worked pretty well the last couple of times; happy to sort the pelican if we get the numbers up a bit further but it's a $250/night minimum spend for the bunkhouse.
AE93 SX 20V - Next Wakefield track day is 13th of November 2015!
1:15.47 at Wakefield Park | 1:59.45 at Eastern Creek GP | 1:08.81 at SMP South | 2:04.77 at Phillip Island
Toymods Club Member
Hey GT,
Are there any spots left? I'm keen, just subject to work...
Not having much luck
Won't be able to make it.
"If you try to fail, and succeed, which have you done?"
My ST185 with 278awkw (2.2L is running...)
1:08.08s @ Wakefield 1:37.29s @ Winton
27.90s @ Esses Hillclimb
Problems at the dyno?
Lily Simpson 6.7.2010
R.I.P.
Thought I had identified the problem, have put the car back together but it is still there.....
"If you try to fail, and succeed, which have you done?"
My ST185 with 278awkw (2.2L is running...)
1:08.08s @ Wakefield 1:37.29s @ Winton
27.90s @ Esses Hillclimb
The knock? The exact same knock or failed again?
Lily Simpson 6.7.2010
R.I.P.
Found no evidence of bearing failure (without pulling the caps off admittedly), no heat marks, no movement in the rods, no metal filings anywhere.
However found the power steering pump pulley was cracked through and bent, but still in one piece. So assumed it was the pulley as giving it a hit moved the parts independently and gave a knocking noise through the joints.
Alas, it would seem that was not it, and i have wasted a huge amount of time...
"If you try to fail, and succeed, which have you done?"
My ST185 with 278awkw (2.2L is running...)
1:08.08s @ Wakefield 1:37.29s @ Winton
27.90s @ Esses Hillclimb
piston slap?
sorry to hear dude. i know how it feels to try get shit together and seemingly never make headway
Cut open the oil filter and look for metal
Bookmarks