as long as you have an oil pressure sensor in the pressure side of the system you should be fine
I have nearly finished my mx73 1uz conversion, just got a front mounted oil filter setup but the pressure sensor hits the engine mounts, without it it will all bolt up sweet, just wondering if I really need the sensor or if I can modify it with a fitting to relocate it to the other side , any help
as long as you have an oil pressure sensor in the pressure side of the system you should be fine
ST177 UZS131 Crown Royal 'G' the pimping limo like daily 1UZFE 144rwkw
DST17T MS53 68 Crown Custom Wagon 7MGTE 266rwkw
or run a braided line from it to the strut apron then buy a vdo oil adjustable oil pressure light and set it up to come on at 200 kilopascals and use the other side for a mechanical oil pressure guage
Another option would be to buy a $30 sandwich plate.
Buy a 90 degree fitting. Most of the auto parts stores usually carry them. Then screw it in so switch faces away from mount, or better still get oil gauge and sender set.
Bookmarks