Moroso 4age baffled sump group buy

[Bazda]

Ummm if your exhaust clears the stock sump will it clear this?
Mine has about 5mm of clearance....

Not a problem for AE86 guys but not being able to run off the shelf extractors without chopping them up is a minus

Yes it has the same depth as the OEM pan where the ex passes through.

[fixeruperer]

my only concern was the "patch" for the sump, seems like a possible place to leak.

[Bazda]

my only concern was the "patch" for the sump, seems like a possible place to leak.

Def wont leak as the 2 holes for the notch will be threaded as well which allen 1/8npt bungs will be installed when used on 16v blocks.

[fixeruperer]

okay bazda.

[Bazda]

Sneaky peaky picture of the sump so far

[Stolic]

Looking good Barry

*starts warming up credit card*

[SRacin]

Sneaky peaky picture of the sump so far

Nice. Will it hang lower than a factory sump? The sump guard /bash plate on the rally car is pretty tight to the cross member and sump (AE82)for ground clearance, and also my circuit car (ke70) is just super low anyway. Look forward to it.


Cheers

[Bazda]

We have extended it down slightly I will re check measurements and post up once we finialise this.

[Bazda]

3d Drawings have been finished. Awaiting the final copy to approve now!

[Stolic]

Sounds like this is coming together nicely. Thanks for the update Barry

[Bazda]

Another update, we included a bolt in windage tray so you wont need to use the OEM one.
Just need to extend it up to the front of the sump and done!

[fixeruperer]

Hey baz, what's happening with these things ?
Not that I need it, I Havnt touched the car in a long time and won't be for a while.
Just been a long time since an update.

Cheers.

[Bazda]

Hey baz, what's happening with these things ?
Not that I need it, I Havnt touched the car in a long time and won't be for a while.
Just been a long time since an update.

Cheers.

Moroso said they should be done mid month, then they need to be shipped out to me.

[fixeruperer]

ok sweet, no probs.
cheers.

[Bazda]

Updated as per first post, check it out guys