1uz vvti fuel pressure.

[markelldawe]

Hi,I'm chasing the factory spec for fuel pressure on a vvti 1uz. It is a different setup to an earlier 1uz, it has the fuel reg at the rear and a single line running to the fuel rail.(no return line) from the fuel rail.

Thanks, Mark.

[.T.]

Hi Mark,

44-50psi is the required fuel pressure. Lots of late toyota motors run this pressure - so you can use an oem pump from an aurion for example (if the tank design will allow it)

T

Hi,I'm chasing the factory spec for fuel pressure on a vvti 1uz. It is a different setup to an earlier 1uz, it has the fuel reg at the rear and a single line running to the fuel rail.(no return line) from the fuel rail.

Thanks, Mark.

[markelldawe]

Hi Mark,

44-50psi is the required fuel pressure. Lots of late toyota motors run this pressure - so you can use an oem pump from an aurion for example (if the tank design will allow it)

T

Thank you, much appreciated.