Hey guys & girls I've run in to a bit of a problem & could use some help/advice.

My car is about a week away from being started after being rebuilt. It's an AE92 Trueno GT Z. I've decided to go with a water to air intercooler (from a Liberty RS) for a couple of reasons.

1st I don't want to go front mount because of lag & I don't want to lose my aircon & I want to do away with the top mount because of heat soak.

2nd I had a lil prang & banged up the front end & bent the bonnet cracking the scoop. I've got a new bonnet but without the scoop so the top mount won't fit under there now.

I'm having a bit of trouble trying to fit it in there with minimal pipe length. I am relocating the battery to the boot so I could mount it up the where the battery used to be but the piping would be similar to a front mount.

What are my options? Should I get a smaller unit & try & squeeze it in there or go with a bigger top mount?
I should also mention that I've gone with 0.5 oversized pistons, heads been worked & Tomei 264 cams & an SC14 charger.