Results 1 to 3 of 3

Thread: 4agte20v into RA65 wiring help!

  1. #1
    Forum Member 1st year Apprentice
    Join Date
    Dec 2010
    Location
    victoria
    Posts
    44

    Default 4agte20v into RA65 wiring help!

    hey guys,

    well ive done a comprehensive search of this forum and a couple others, but i need a definite answer...

    only problem ive run into that i cannot figure out for myself is finding the wiring diagrams for the inside of the ra65. there's one plug above the a/c box that used to be connected to the old 22re ECU. just chasing a wiring diagram for that plug to wire it into the 20v loom.

    i don't have time atm to trace each wire and figure out what they do so in the meantime ill try this and if i can't find any answers ill have to use that approach in the end.

    note: i DO NOT have the 22re ECU anymore as i sold it with the old 22re engine

    thanks in advance, sam

  2. #2
    Junior Member Automotive Encyclopaedia
    Join Date
    Nov 2011
    Location
    qld
    Posts
    1,123

    Default Re: 4agte20v into RA65 wiring help!

    dont be so bloody lazy hehhehe
    tracing wires means u actually learn how thigns work
    anyway

    all u need is a battery wire
    ignition wire is the black/orange or black/yellow on the ignition key
    black/white in key is start signal

    u have to convert the 20v loom to rear wheel drive anyway so u might as well
    run all power wires and relays for the 20v to under the dash so it looks as if u did a nice job
    then half the wires to get it runnign will goto your ignition switch
    and one to your fuel pump

    think ive done about 200 20vs so i have bad dreams about them in my sleep heheheh

  3. #3
    Forum Member 1st year Apprentice
    Join Date
    Dec 2010
    Location
    victoria
    Posts
    44

    Default Re: 4agte20v into RA65 wiring help!

    lmao i know how things work!

    i just don't have enough time to seperate the dash further and trace them...if i could have things my way i'd be swapping my better condition ma61 dash into the ra65 but my boss is on my ass to finish it and get it out of the shop haha
    i will be re-wiring the hacked 20v loom this weekend however so ill be able to work out what i need for that..

    and i sorted a couple of the wires in the celica for the instruments anyway.

    im hoping to have this all done soon so i can post up my finished product and so i can have my baby back haha

Similar Threads

  1. o2 sensor wiring (help with wiring up a universal one ?)
    By offziide93 in forum Tech and Conversions
    Replies: 4
    Last Post: 12-06-2011, 03:22 PM
  2. Replies: 6
    Last Post: 08-01-2009, 12:57 PM
  3. wiring query (re-wiring the MZ10)
    By thechuckster in forum Tech and Conversions
    Replies: 1
    Last Post: 18-12-2007, 04:10 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •