Results 1 to 13 of 13

Thread: Jamboree!!!!

  1. #1
    Junior Member Backyard Mechanic hypo23's Avatar
    Join Date
    Nov 2005
    Location
    nsw
    Posts
    457

    Default Jamboree!!!!

    Anyone else heading up or racing, want to catch up??? discuss
    cheers steve,

    24 hours in a day, 24 beers in a case..................coincidence?

    1ggte, 11.22 @122mph

  2. #2
    Toymods Club Member 1st year Apprentice
    Join Date
    Aug 2010
    Location
    NSW
    Posts
    9

    Default Re: Jamboree!!!!

    Not sure if you know this...But i am!!!

    Anyone on here entered this year?? Or spectating??
    One step foward,Two steps back ,seems thats how my Projects seem to go..

    Looking for a decent TA22 Drivers front gaurd(round lip),Bonnet and Bumper.Pm me.

  3. #3
    Bull now in china shop! Domestic Engineer NME308's Avatar
    Join Date
    Dec 2007
    Location
    Qld
    Posts
    752

    Default Re: Jamboree!!!!

    Just checked my bank balance and it still says the bank owns my butt... Wish I was going to either race or spectate but I've gotta concentrate on getting my home loan down.

    Good luck Steve and Brad even though you are coming from the wrong side of the border!!!

    Cheers,
    Jason
    3TC Compound Turbo 1976 TA23 - Members Ride Thread HERE
    479RWHP on 50psi and 70psi hasn't broken her at the track!

  4. #4
    Toymods Club Member 1st year Apprentice
    Join Date
    Aug 2010
    Location
    NSW
    Posts
    9

    Default Re: Jamboree!!!!

    Not long to go now.
    http://www.jamboree.com.au/

    Not much interest for Sport Compact racing on toymods??
    One step foward,Two steps back ,seems thats how my Projects seem to go..

    Looking for a decent TA22 Drivers front gaurd(round lip),Bonnet and Bumper.Pm me.

  5. #5
    Bull now in china shop! Domestic Engineer NME308's Avatar
    Join Date
    Dec 2007
    Location
    Qld
    Posts
    752

    Default Re: Jamboree!!!!

    So someone spill the beans already!!!
    How did you guys go?
    I've been on boostlosing and a couple of other sites and no one had anything that I could see on you pair...

    Surely one of you must have a 'smart' phone so travelling home is hardly an excuse!

    Cheers,
    Jason
    3TC Compound Turbo 1976 TA23 - Members Ride Thread HERE
    479RWHP on 50psi and 70psi hasn't broken her at the track!

  6. #6
    Toymods Club Member 1st year Apprentice
    Join Date
    Aug 2010
    Location
    NSW
    Posts
    9

    Default Re: Jamboree!!!!

    Jason i think i'll let Steve spill the beens on this one!!!

    The reception was shocking out at Willowbank,maybe to many cells in one area.
    One step foward,Two steps back ,seems thats how my Projects seem to go..

    Looking for a decent TA22 Drivers front gaurd(round lip),Bonnet and Bumper.Pm me.

  7. #7
    Toymods Club Member 1st year Apprentice
    Join Date
    Aug 2010
    Location
    NSW
    Posts
    9

    Default Re: Jamboree!!!!

    Also Gas Motorsport in Factory Extreme ran a [email protected]!!! Unbelievable then 1hour later on they're next run a [email protected]!!! All with a 2JZ!!!
    One step foward,Two steps back ,seems thats how my Projects seem to go..

    Looking for a decent TA22 Drivers front gaurd(round lip),Bonnet and Bumper.Pm me.

  8. #8
    Bull now in china shop! Domestic Engineer NME308's Avatar
    Join Date
    Dec 2007
    Location
    Qld
    Posts
    752

    Default Re: Jamboree!!!!

    Hmmm found the details I was looking for!



    Cheers,
    Jason
    3TC Compound Turbo 1976 TA23 - Members Ride Thread HERE
    479RWHP on 50psi and 70psi hasn't broken her at the track!

  9. #9
    Forum Member 1st year Apprentice
    Join Date
    Feb 2011
    Location
    Vic
    Posts
    3

    Default Re: Jamboree!!!!

    Quote Originally Posted by NME308 View Post
    Hmmm found the details I was looking for!



    Cheers,
    Jason
    jamboree 22 was an awesome event- my 6th year in a row- and must say.. the best so far!

    gas setting a 2j record..
    not to mention MICKS motorsports running a [email protected] in a 4 banger s15. which too is a world record!
    but i think the big winner of the event was the infinity of scotty porter and the r35 of jacobson!
    the vq35 of porter is a really going to shake up factory extreme class. ran consistant 6.50's and i beleive even went 6.40 on sunday
    and the car does it so eassssyyy! leaves the hole on the 2step like taking a shit. and will be interesting to see when jacobson puts
    a vq38 in the GTR- such a sexy car!
    pitty scotty hoffmans rolla wasnt out!... and hopefully next year get to see that Quickbitz Supra go up against Po Tung's supra.
    should be good. but all in all... was an awesome event!!!

  10. #10
    Toymods Club Member 1st year Apprentice
    Join Date
    Aug 2010
    Location
    NSW
    Posts
    9

    Default Re: Jamboree!!!!

    I agree with all that.

    MM S15 was an awesome pass on that 6sec the block split though.Factory block.
    Scott Porter went 6.46 still needs to get sorted,it will be one to watch.


    I'm still amazed how little toyota people actually go there.
    Was a warm weekend though that probably detered alot of people.

    Can't wait for next year, that kicks off at WSID.
    One step foward,Two steps back ,seems thats how my Projects seem to go..

    Looking for a decent TA22 Drivers front gaurd(round lip),Bonnet and Bumper.Pm me.

  11. #11
    Junior Member Backyard Mechanic hypo23's Avatar
    Join Date
    Nov 2005
    Location
    nsw
    Posts
    457

    Default Re: Jamboree!!!!

    Well what an awesome weekend, first time racing at willowbank and to take out street compact was awesome.

    Qualifying saturday was ordinary, with stinking hot temperatures and the first time racing on my bigger tyres they grip so much better than my little 205s, three runs were 12.8, 12.4, and 12.2 all stuffing the launch, with 2.1 60 footers.

    Sunday i ended up dialling in 11.8 knowing that if i could get it off the line mid to low 11s were achievable, and it served me well in sydney getting me to the final, i had a couple of close calls, where old mate beside me red lit, and on one run i ended up going 11.6 with a back off at the end of the track. Best 60 foot of the day was a 1.6 with regular 1.7s during the day. Best on the 205s was a 1.5, need some more practice as its a totally different car to get off the line.

    Will try and get some pics and vids up in the next few days, just need to say a big thank you to justin and everyone in the backtrack crew for their help and support, and also john at microtech for letting us into the corperate box, the girls and kids wouldn't have survived without it.



    As the boys above said there was some awesome racing with records broken throughout the weekend
    cheers steve,

    24 hours in a day, 24 beers in a case..................coincidence?

    1ggte, 11.22 @122mph

  12. #12
    Junior Member Grease Monkey greg's Avatar
    Join Date
    Jun 2007
    Location
    NSW
    Posts
    133

    Default Re: Jamboree!!!!

    Congratulations again steve, 2nd at w/sid and 1st at willowbank in your first year in serious competition is a credit to you and all the crew.
    Cheers Greg.
    Brum,was going to be a billy cart ,now has motor and 6 speed+++
    1uzfe Mx83
    2jzgte MX83

  13. #13
    Bull now in china shop! Domestic Engineer NME308's Avatar
    Join Date
    Dec 2007
    Location
    Qld
    Posts
    752

    Default Re: Jamboree!!!!

    Oh what a feeling - old toyota!!?

    Great work Steve, bet it tastes real sweet too!

    Cheers,
    Jason
    3TC Compound Turbo 1976 TA23 - Members Ride Thread HERE
    479RWHP on 50psi and 70psi hasn't broken her at the track!

Similar Threads

  1. Sydney Jamboree
    By hypo23 in forum Previous NSW Events
    Replies: 15
    Last Post: 03-04-2012, 07:28 PM
  2. anyone racing at Jamboree this weekend?
    By kriso in forum Queensland Events
    Replies: 3
    Last Post: 25-08-2010, 06:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •