Gearbox confusion....HELP!!!

[RACINROLLA]

Hey guys,
I know this has prob been covered 400 times....
But I do not what gearbox I have...
Slowly working through the corolla build....The car had a 3TC engine with a 5 speed.
It has a hydraulic clutch on the drivers side of the box and starter on the left....
I thought it was a T50...
But it has a different position of the fork and slave on the spare that i have that i thought was a T50 aswell and is bolted to a 4age.
The clutch slave and fork comes out the passengers side and the starter on the drivers side....
I also have a box mated to a 18rg.
Any ideas what box codes I have????
I will try get some pics of them all.
Cheers Matt

[4th surf]

Now let's start with the car you have. All data off the build plate on the fire wall then take pics of the boxes and go from there

[thechuckster]

helpful pic:

(from left to right, T50, W50, W58, R154)

note that the bellhousing is separate for all of these so you can have the clutch/stater in different positions with the same box. Ergo, the difference will be the bellhousing not the box.

[crowncustom]

Possible it has a 1G bellhousing as the slave is on the passenger side.
Cheers Brett.