cressida mx83 lower front control arm bushes

[pando666]

I've been searching for front lower control arm bushes made from urethane and cant find any. Does anyone know where to get them?, brand?, part number?, etc.
I found radius rod to chassis bushes Superpro SPF1324K.
Can anyone help please..............................

[Cuzzo]

Pretty sure noone makes them. Hence getting custom ones from jzxdavo.

[andrew_mx83]

none available apart from that group buy. dave may have some odd spares left but he sold most of them off a while ago

i could probably be persuaded to get rid of the ones in my race car which havent turned a wheel yet, as im going solid now.

[mr1jz]

Sorry to threadjack but will you be.making sets of solids Andrew.

[andrew_mx83]

possibly. these are the ones i made for 1jz-747, they replace the trailing arm bush in the rear hub. ill have to do some measurements and confirm where else it will fit as those 3/4" bearings are freakin huge.

[pando666]

yes Andrew, I would be interested in those bushes. I sent you a PM.

[HIZOKU]

More X8 solid bushes. these are rear upper arm and one in rear knuckle not the one andrew has listed above.



Solid tension rod bearings.


*** Should add i have the last ones for the knuckle being made just got example should be Fabbed up soon. there is currently 5 of us getting a set.