W58 Speed sensor pinout

[ivan129]

Hi Everyone, I went looking for the pinout for the W58 gearbox speed sensor and found many threads where others were asking the same question, so once I found the answer I thought I'd post a picture for others to find.

W58 Gearbox Sensor_1.jpg

The signal (Output) is a 5V square wave. The sensor seems quite happy to run from 12V so if using a 12V supply the signal becomes a 12V square wave. Hope this helps others. Regards Ivan

[JadeEstevez]

Is this so you can run an electronic speedometer?

[wilbo666]

I've got it on my wiki also

Oh and the supply voltage is battery voltage (ignition switched), not 5V

http://wilbo666.pbworks.com/w/page/5...peed%20Sensors

Cheers
Wilbo

[dumbass]

just remember centre pin is earth 99% of the time on a toyota

so this leaves u with the 2 outer wires
one is 12v other is signal
so u have 50% chance of getting it right