RA40 Brake Master Cylinder upgrade

[blanky]

I am looking for a bigger master cylinder for my RA40 to accommodate the brake upgrade i intend to do.

without changing the brake booster to a ra23 four bolt.

What out there bolts up nice? , some modification is fine . I'm looking for the 1" mark considering disk front and rear

I'm going to eBay till i find what I'm looking for i just need your help to find what that is


cheers

Blanky

[masterofsinanju]

A bit of googling (using site:toymods.org.au) says maybe "late model camry".

Apparently starion or na r32 skyline could work for you too, but camry would be easier to get.

[blanky]

ok I've been looking all over the net for answers ,

tell me if i'm wrong so others can learn .

Toyota 205 GT4... the GT4 is 15/16" reference,

https://www.toymods.org.au/forums/te...ooster-mc.html


Toyota Camry 1" brake master cylinder p/n 47201-06190 Reference,

https://www.toymods.org.au/forums/te...inch-bore.html

ive also seen stuff on tercels , pajero , starions, evos, tritons and lancrusers but nothing concrete yet or how much modification is required

[masterofsinanju]

Looks like they are all valid options although folks not the camry reservoir is big enough to foul in 22's. Not a problem in a 40? They should all bolt straight up to your booster so the only question is about lines etc coming out at different angles.


Hie thee to a wreckers and start measuring.

[blanky]

Mitsubishi L300 van its a 15/16 mc another possibility

[celicaRA43SGE]

Hi Blanky

Toyota 4wd, or work utes, I have a 1" and also a 15/16" for sale that will fit if you are interested

Graham