I have fitted a bigport to a blacktop, I had to take 3mm off the back of it and then it fit nice.
The crankshaft mounted fan belt pulley on my Silvertop has come loose, hammering the keyway in the pulley.
From ToyoDiy.com, the part number is 13470-16030 but I can't find a replacement readily. The Part No for the smallport pulley is 13470-16010 - so it must be different.
Can anyone tell me what the differences are? Could I use a smallport pulley and machine it or space it to make it work on my Silvertop?
FWIW, the cam belt pulley [also destroyed] is the same part number as the Smallport, and so is available locally from Toyota.
Thanks in advance
Cheers ..... Rick Jones
Fraser Clubman
I have fitted a bigport to a blacktop, I had to take 3mm off the back of it and then it fit nice.
Thanks Sam.
I found a Smallport one and measured it against by dead Silvertop one and couldn't find any differences [apart from the part number!]
Front pulley now machined off and the clubbie is back on the road!
Cheers ..... Rick Jones
Fraser Clubman
Part number can vary due to different suppliers of the part to Toyota during production.
SHEPPO..
20v ST and 16v smallport/big port FWD pulleys are the same.
20v BT has a better harmonic damper and the snout is also 2mm shorter as the crank sprocket is 2mm thicker to accommodate the thicker cam belt.
1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
Now 9AGTE 410kw atw
www.mrpltd.co.nz - Manon Racing Products
Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
www.facebook.com/mrpltd - LIKE
Check out the Toymods Sponsors section for Deals
Bookmarks