Results 1 to 1 of 1

Thread: 1UZ Gasket Kit, Engine Valve Grind (04112‑50041)/(04112-50040)

  1. #1
    Breaker OfThe Unbreakable Backyard Mechanic Herus's Avatar
    Join Date
    Feb 2007
    Location
    SA
    Posts
    310

    Default 1UZ Gasket Kit, Engine Valve Grind (04112‑50041)/(04112-50040)

    I went searching over the internet to see what actually came in this kit, and was unable to do so.

    I thought I would go through and create a list for anyone else searching for it.
    I also have some bits that Im not sure what they are.
    Part numbers are from Toyodiy, so they may be a little out of date.

    Cam Seals x2 - 90311‑38036
    Spark Plug Seals x8 - 11193‑15010
    Cam Cover Seal x2 - 11213‑50020
    Intake Manifold Gasket (Engine) x2 - 17171‑50010
    Exhaust Manifold Gasket x2 - 17173‑50020
    Head Gasket - 11115‑50020
    Head Gasket No2 - 11116‑50010
    PCV Valve Grommit - 90480‑18001
    Lower Exhaust Gaskets x2 - 90917‑06043
    Upper Manifold Gaskets x4 - 17176‑50020
    Water Crossover Pipe Gaskets x4 - 16341‑50010
    Cam Cover Bolt Washers x16 - 90210‑07001
    Valve Stem Seals x32 - 90913-02085
    Injector O-rings x8 - 90301‑07001
    Injector Rubber Grommit x8 - 90480‑13005
    Alu Washers x4 - Fuel related
    Alu Washers x2 - Fuel related
    Alu Washers x9 - Fuel related
    Alu Star Washer x1 - Fule related
    Rubber Split Washer (Cam Sensor Rubber) x1 - 90480‑26025
    Rubber Square Washer x1 - 11359‑50010
    O-ring for Water By-Pass Pipe x1 - 96761‑24019
    Oil Cap Seal x1 - 12195‑50010
    EGR Gaskets (Not Needed) x2
    Misc Plastic Rubbers x heaps. Includes all the rubbers from the plastic surrounds for the engine.

    I cant find out what these are for.
    They are ~10mm across, steel washer with a rubber centre.
    I have 8 of them.

    Building on this, 04111-50040 / 04111-50041 includes the following.

    Front Main Seal - 90311‑43004
    Rear Main Seal - 90311‑95006
    Oil Filter Housing Gasket - 15692‑50020
    Oil Pickup Gasket - 15147‑50010
    Sump Plug Gasket - 90430‑12020

    There is a couple of other misc bits that I cant tell what they are from the diagram.

    Any suggestions?

    Herus
    Last edited by Herus; 03-06-2012 at 10:48 PM.
    Member's ride thread!

    Joined Team BHG, 19/7/2008

    Joined Team JZX83, 15/11/08

Similar Threads

  1. Gen 2 3SGTE Valve cover gasket
    By punkture in forum Tech and Conversions
    Replies: 6
    Last Post: 27-10-2010, 07:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •