Can I use a 4AGZE ABV Solenoid to control a turbo wategate?

[GZE016]

My understanding is the solenoid would control manifold pressure by opening the ABV to bleed off boost which is essentially what I want to do using an aftermarket ECU and the wastegate on the turbo.

Does this sound feasible?

[ballpencil]

As in Electronic Boost Controlling? Others will need to chime in but you'd need a solenoid that support PWM drive signal. This means the solenoid has to be able to switch on and off quick enough, typically in the region of approx 10-40 cycles per second. I don't think ABV is able to do this? A better solenoid would be MAC pneumatic solenoid valve part number 35A-AAA-DDEA-1BA.

[GZE016]

Yes that is what I'm trying do, I'll look into the MAC soleoid.

Thanks.