Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: taking off z20 door trim

  1. #1
    2JZ POWA Chief Engine Builder GU11TY's Avatar
    Join Date
    Nov 2005
    Location
    nsw
    Posts
    3,330

    Default taking off z20 door trim

    hey guys i have been asked a few time how to take off the old soarer door trims casue some ppl cant find the hidden screws etc so finally i made a tutorial

    start by winding down ur window which i believe makes it a bit easier to take it off

    start off by gettin a flat screwdriver or sumthing to unclip the window controller section and pop that up like so...



    then disconnect the plugs


    next up at ur side mirror ther is a little triangular section
    just unclip that(there r no screws)



    next down at the rm rest there is a section to put ur fingers in.. there is a little carpeted bit at the bottom.. just pull that up and u will find 2 screws
    unscrew that n take it out


    Z20 SOARER WHORE (totalling 14 z20s so far)
    PREVIOUS RIDES - 5 GZ20 soarers, 1 MZ20 soarer, 2 MZ20 aerocabins soarers, 7 MZ21 soarers, 3 ke70s, AE92 rola, 1973 corona, 85 corona, tarago party bus
    CURRENT - 530hp 2jz MZ20 Soarer and race soarer with carbon fibre bonnet and boot and 8point cage

  2. #2
    2JZ POWA Chief Engine Builder GU11TY's Avatar
    Join Date
    Nov 2005
    Location
    nsw
    Posts
    3,330

    Default Re: taking off z20 door trim

    next at the door handle there r 2 clips.. pop them out and u will find 2 screws
    unscrew them and then slide the handle and the surround plastic bit upwards to take out
    and you will find another 2 screws under that




    next unscrew the gold screw covered buy a little plastic cover up under the triangular plastic piece


    and now at the bottom of the door trim there are 3 screws


    now u should be able 2 slide the whole door trim up and take out



    there is a plug where the door light is.. u can unplug that if u want to take the trim fully away otherwiise just access wat u want with leaving it there
    Z20 SOARER WHORE (totalling 14 z20s so far)
    PREVIOUS RIDES - 5 GZ20 soarers, 1 MZ20 soarer, 2 MZ20 aerocabins soarers, 7 MZ21 soarers, 3 ke70s, AE92 rola, 1973 corona, 85 corona, tarago party bus
    CURRENT - 530hp 2jz MZ20 Soarer and race soarer with carbon fibre bonnet and boot and 8point cage

  3. #3
    Junior Member Domestic Engineer
    Join Date
    Sep 2005
    Location
    south australia
    Posts
    609

    Default Re: taking off z20 door trim

    That's great except for the sms shortcut speak.
    rep reserved until then.

  4. #4
    back into it Chief Engine Builder
    Join Date
    Mar 2006
    Location
    nsw
    Posts
    3,991

    Default Re: taking off z20 door trim

    ill give you plus rep even if you did stuff mine learning how to do it!hahahahah

  5. #5
    Junior Member Automotive Encyclopaedia Big rob's Avatar
    Join Date
    Dec 2005
    Location
    Victoria
    Posts
    957

    Default Re: taking off z20 door trim

    hm there is one flaw. HOW DO YOU UNDO THe lock trim with out fucking those little metal clips? Yeah solve that one or tell me where to get replacemnt little metal clips nice job by the way.

  6. #6
    back into it Chief Engine Builder
    Join Date
    Mar 2006
    Location
    nsw
    Posts
    3,991

    Default Re: taking off z20 door trim

    Quote Originally Posted by Big rob
    hm there is one flaw. HOW DO YOU UNDO THe lock trim with out fucking those little metal clips? Yeah solve that one or tell me where to get replacemnt little metal clips nice job by the way.
    easy he stuffed his and stole them off my one!hahahaahahha

  7. #7
    Junior Member Automotive Encyclopaedia Big rob's Avatar
    Join Date
    Dec 2005
    Location
    Victoria
    Posts
    957

    Default Re: taking off z20 door trim

    stil doesnt help me now does it................................................ .......................

  8. #8
    2JZ POWA Chief Engine Builder GU11TY's Avatar
    Join Date
    Nov 2005
    Location
    nsw
    Posts
    3,330

    Default Re: taking off z20 door trim

    hahah i dunno wher 2 get clips
    glue ur door trim on
    Z20 SOARER WHORE (totalling 14 z20s so far)
    PREVIOUS RIDES - 5 GZ20 soarers, 1 MZ20 soarer, 2 MZ20 aerocabins soarers, 7 MZ21 soarers, 3 ke70s, AE92 rola, 1973 corona, 85 corona, tarago party bus
    CURRENT - 530hp 2jz MZ20 Soarer and race soarer with carbon fibre bonnet and boot and 8point cage

  9. #9
    Junior Member Conversion King whatthe?'s Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    2,754

    Default Re: taking off z20 door trim

    Are they the little u shaped ones with the speaders that lock into slots in the panel/door in question? If so, any toyota from the 80s (and possibly later) has heaps holding assorted plastic bits on in the interiors (MA61/RA65 for sure) Pickies time!
    Project megap00 - Gave up and sold up. Money tree died

  10. #10
    2JZ POWA Chief Engine Builder GU11TY's Avatar
    Join Date
    Nov 2005
    Location
    nsw
    Posts
    3,330

    Default Re: taking off z20 door trim

    Quote Originally Posted by barned01
    That's great except for the sms shortcut speak.
    rep reserved until then.
    haha man i cant change the way i sms spoke on that
    so if u wanna give me rep on wat i did that cool but otherwise i aint changin the sms speak casue now i jsut do it naturally ithout thinkin and its 2 hard 2 change it
    Z20 SOARER WHORE (totalling 14 z20s so far)
    PREVIOUS RIDES - 5 GZ20 soarers, 1 MZ20 soarer, 2 MZ20 aerocabins soarers, 7 MZ21 soarers, 3 ke70s, AE92 rola, 1973 corona, 85 corona, tarago party bus
    CURRENT - 530hp 2jz MZ20 Soarer and race soarer with carbon fibre bonnet and boot and 8point cage

  11. #11
    2JZ POWA Chief Engine Builder GU11TY's Avatar
    Join Date
    Nov 2005
    Location
    nsw
    Posts
    3,330

    Default Re: taking off z20 door trim

    Quote Originally Posted by Big rob
    hm there is one flaw. HOW DO YOU UNDO THe lock trim with out fucking those little metal clips? Yeah solve that one or tell me where to get replacemnt little metal clips nice job by the way.
    haha they shouldnt stuff wen u take em off
    u pull the door trim off and then it should clip str8 bak in
    mine has neva stuffed n ive dun it heeps on 2 dif sors
    Z20 SOARER WHORE (totalling 14 z20s so far)
    PREVIOUS RIDES - 5 GZ20 soarers, 1 MZ20 soarer, 2 MZ20 aerocabins soarers, 7 MZ21 soarers, 3 ke70s, AE92 rola, 1973 corona, 85 corona, tarago party bus
    CURRENT - 530hp 2jz MZ20 Soarer and race soarer with carbon fibre bonnet and boot and 8point cage

  12. #12
    Junior Member Domestic Engineer
    Join Date
    Sep 2005
    Location
    south australia
    Posts
    609

    Default Re: taking off z20 door trim

    Quote Originally Posted by GU11TY
    haha they shouldnt stuff wen u take em off
    u pull the door trim off and then it should clip str8 bak in
    mine has neva stuffed n ive dun it heeps on 2 dif sors
    Dude It is one of the rules of posting in this section to not use SMS speak
    A little I don't mind but geez that was just shocking.

  13. #13
    2JZ POWA Chief Engine Builder GU11TY's Avatar
    Join Date
    Nov 2005
    Location
    nsw
    Posts
    3,330

    Default Re: taking off z20 door trim

    oh well i find it easy to read lol
    Z20 SOARER WHORE (totalling 14 z20s so far)
    PREVIOUS RIDES - 5 GZ20 soarers, 1 MZ20 soarer, 2 MZ20 aerocabins soarers, 7 MZ21 soarers, 3 ke70s, AE92 rola, 1973 corona, 85 corona, tarago party bus
    CURRENT - 530hp 2jz MZ20 Soarer and race soarer with carbon fibre bonnet and boot and 8point cage

  14. #14
    Junior Member Automotive Encyclopaedia Big rob's Avatar
    Join Date
    Dec 2005
    Location
    Victoria
    Posts
    957

    Default Re: taking off z20 door trim

    lol guilty i would hate to talk to you in person. With all your sms typing skills i wonder how you talk lol. ALso that doesnt make sence. How do you pull off the door trims without buggering the clips. Eventually the little metal tabs breake off.

    And whatthe? yeah they are those little 'U' looking clips with tabs and shit mmmmmmmm.

  15. #15
    Toymods Club Member Domestic Engineer Danners's Avatar
    Join Date
    Dec 2005
    Location
    NSW
    Posts
    782

    Default Re: taking off z20 door trim

    You know there is no need to remove the "window controller" from your door either? Just simply unplug it after you've done all of the following steps.

Similar Threads

  1. 1G Taking off the head?
    By Ray_GZ20 in forum Tech and Conversions
    Replies: 5
    Last Post: 26-02-2006, 02:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •