Replacement 2tgeu tappets/lifters needed

[ToyTA22]

Does anybody know a replacement tappet for 2tgeu, or late, 2tg out of later vehicle i.e more easily available?
Amayama has 6 only in OD I need. Any about $86 each.

My originals are pitted badly around perimiter and marked on top. Cams will be reground to 292 duration.

[J-M kujala]

Some peugeot 405 lifters will work, some are tight some with just good clearance, they are a little higher, so work only with re grinded cams.

Check clearence !! I have test and to some heads they are quite tight.

I think its easy to find good used OEM lifters

[MorGo]

18R-G/2T-G/3T-GTE buckets are all interchangeable so there should not be shortage of used ones (considering how many heads are scrapped by overrewwing/wrong installation...)
Sure,they are matched to the head bores from factory but I have yet to see a bucket that don't fit!

[styler]

Kameari has these aftermarket but expensive

[GT1978]

I have a dead 18RGU head if you need a bucket or two to replace missing ones. I also have a heap of shims so maybe able to help out when it comes time to set the gaps. I say maybe as I changed my cams on Monday to a different set and even with all the shims I have still had to order 8 new ones.

Glen