50mm wide leaves on both.
im looking for the width of the leaf on both, and the mounting distance between the eyes on the body please
ke20 and ke30
thankyou in advance
dude
50mm wide leaves on both.
Member Of The Leaf Sprung Axle Trampers Club
thankyou....
anyone with length of the spring????
surely someone can tellme the length of a ke20 or 30 leaf spring??
i could tell you KE10, which would be shorter![]()
"I'm a Teaspoon, not a mechanic"
"There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)
AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!
damn,,,,i was hoping that it might have been close.
i was wondering if later stuff would fit in my 10 but couldnt find any reference to anyone trying it..
thanks
I believe that the KE20 leaf springs are something like 5cm? (10cm?) longer than KE10 stuff
(try finding cross-section drawings of KE20, it will have eye to eye distance)
however, you can get new eyes bent into the longer leaves if you really liek them, or whole new leaf packs made up for not that much cash.
do you need springs?
edit, see attached, I think this is KE20.. from intereurope manual.. gives at least some dimensions
Attachment 14455
Last edited by oldcorollas; 04-04-2012 at 07:07 PM.
"I'm a Teaspoon, not a mechanic"
"There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)
AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!
thanks for the info...
i was hoping i could just get ke20 or 30 ones as they would have a higher spring rate and just get them reset, but it looks like ill just my standard ones redone with extra leaves...i also assumed the pins and shackles would be larger as well...
Bookmarks