man there are a lot of threads on this lately
I used this:
JDM uses ECU output
I guys,
I was wondering how i can wire up my fuel pump to 4age JDM engine with loom to auspec sprinter to get fuel pump to start wid engine and kill wid the engine ?
man there are a lot of threads on this lately
I used this:
JDM uses ECU output
Wiring diagram at club4ag
Circuit opening relay runs the fuel pump either when the key is in the STA position or when the ECU pin FC (Green - Red, pin 4 on the 14 pin plug) is pulling to ground.
You can build a COR out of two normal relays if you'd prefer.
Hen
Bookmarks