4ag 16v into ae92 where are the writeups!!?

[86degreez]

yes. i have searched, can sum1 tell me where to find a "4age into 4af ae92" conversion guide. you wud think id b able to find one of the thousands...

[c2888]

OMG BROZ, use some half decent english and someone might help you.

There's no guides to swap a 4AGE into a chassis that has a 4af, because you can buy a SX.
Sure you can do it, but you are going the hard way of making something, that's only becomes a average car anyway.
With your 4af powered(is that even right?) you are missing just about everything good about a SX. Brakes, suspension, efi tank, body reinforcement, sportier interior, tacho?

If your heart is set on on it, then go for it. But i will tell you, sell your car and find a SX.

dan

[oldcorollas]

i would contend this is less of a conversion.. and more of a swap, since, as stated, the engine was available in australia in that car....

just get the manul for both the F and G version.. and swap over everything that say it was specific to the G.....
the conversion guide is the factory manual.

[Mos]

Hi,
If you grab the wiring looms and dashboard and accessories out of the 4AGE powered corolla you won't need to do much at all to get it running - just swap everything across and you're done.
4A-FC needs extensive wiring modification, 4A-FE is easier but there are still differences.
Mos.

[DigitalPho3nix]

Buy an SX. It'll be cheaper, and less hassles.

[Hydra]

And, the swap is so easy that anyone can pull it off

[takai]

1. Unbolt 4AF
2. Bolt in 4AG
3. ???
4. Profit (*read, poor)

[Hydra]

Haha pretty much

Might as well get a 20v while you're at it...

[The Witzl]

nah... the 20v loom doesnt plug into an AE92, you actually have to modify the wiring.

an AE92 4age loom will literally plug into just about any AE92...... if i remember correctly.....