if u still want a map u could get the one from hitman and convert it over.
laterdays
hi, am doing some searching on behalf of others...
The car (TA22) has a 3TGTE (properly rebuilt, mildly warmed up, stock injectors/turbo), and an old Haltech E6S.
We have a basic map for the car - but it seems to be incomplete, e.g. no acceleration enrichment (it called it throttle pump i think), no battery voltage compensation, no after-start enrichment, etc.
The engine is also in need of an aux-air valve (running uber-rich when cold does not count as a fast idle) - but that's a separate project.
I'm curious if anyone has/had a 3TGTE with one of these ECUs - and if so, do you have early model haltech maps? Also - what did/do you use for an aux-air valve?
tia,
Charles.
Last edited by thechuckster; 11-06-2006 at 01:43 PM. Reason: wrong engine model - doh!1
if u still want a map u could get the one from hitman and convert it over.
laterdays
Looking for a new toy. If you have something 18r powered let me know.
RIP, where ever you are :- 1974 celica, 3tgte and 186.5hp at 6500rpm
i think the owner knows of the hitman mob - but i will ask next time i see him.
Hitman's web site is far more useful than haltechs (and seeing as heltech's own forum has popups for virusware software and other net nastiness, i'm not going back there).
I got the ealy haltech software to run on a variety of PC's - despite rumours of it only running on w98 or earlier OSes and very slow PC's.
i converted hitmans f9 maps to be in f3 format,
ive neva had probs with my old laptop but my newer one wont work cause it says its too fast to open the software
laterdays
Looking for a new toy. If you have something 18r powered let me know.
RIP, where ever you are :- 1974 celica, 3tgte and 186.5hp at 6500rpm
Bookmarks