be here by eight yes
uh what time does it start? 8am??
20v adub now has mad camber![]()
be here by eight yes
AW11 - 1988 Red ADM 4AGZE conversion +
MZW11 - 1987 Track car - "Ag-Spec Racing 1" - 1MZ powered AW11
ST246 - 2002 Caldina GT-Four 'N-Edition'
MS65 - 1973 Bash Car bash.skyracing.tv/
Tow truck + MR2 = Vitodub
MY BELOVED AW11...Updated members ride thread>>>>http://www.toymods.net//forums/showt...=4584#post4584
AW11s always welcome in my driveway !
AE93 SX 20V - Next Wakefield track day is 13th of November 2015!
1:15.47 at Wakefield Park | 1:59.45 at Eastern Creek GP | 1:08.81 at SMP South | 2:04.77 at Phillip Island
Toymods Club Member
I guess those oil leaks were a bit more serious....
Got my $ worth out of these
![]()
AW11 - 1988 Red ADM 4AGZE conversion +
MZW11 - 1987 Track car - "Ag-Spec Racing 1" - 1MZ powered AW11
ST246 - 2002 Caldina GT-Four 'N-Edition'
MS65 - 1973 Bash Car bash.skyracing.tv/
Good work! That tops my molten black "green"-stuffs i'd say.
AE93 SX 20V - Next Wakefield track day is 13th of November 2015!
1:15.47 at Wakefield Park | 1:59.45 at Eastern Creek GP | 1:08.81 at SMP South | 2:04.77 at Phillip Island
Toymods Club Member
had nothing to do with the leaks. oil feed hose off the block split coming into turn 10 and sprayed oil right onto my exhaust manifold equalling big fireball
in summary; aeroquip - fuck you
Aeroquip (basically Eaton) is decent enough hose? Assuming it was suitable for the application and routed correctly (no sharp bends, not stressed or twisted) I would be mad as hell if the hose failed.
It split very close to the fitting into the mocal oil relocator on the block. Hose is straight and with nothing anywhere near it there. Yes i am mad....
That's odd, is it one of those skive and DIY jobbies (screw hose into threaded collet, screw fitting down the guts) or is it crimped?
pushlok hose dude. nevertheless its not my fitting that made it fail, the hose didnt come off the fitting, the hose split
Rip the fitting off and see if the hose split all the way to the end? There could of been a defect where the hose was cut and it's started from there and worked it's way up. Your an unlucky **** to have it happen now though?
Bookmarks