Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Dry Sump Kit 4age/7age

  1. #1
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Dry Sump Kit 4age/7age

    Hey Guys,

    This is most likely the most complete kit on the market, all you have to do is add a oil filter relocation block, and plumb the system.

    $3850NZD gets you all the listed below.
    If you dont require power steering setup its less $150NZD

    The kit will contain the following:
    - 3 Stage custom made dry sump pump made in USA
    - Pump bracket (We can supply brackets to suit where ever you want to install the pump just let us know)
    - Custom Moroso sump with -12AN ports
    - 2 Gallon Peterson aluminium tank with brackets
    - 2x -12AN Moroso Screen filters
    - Moroso breather Can
    - Moroso oil filter block off plate
    - Moroso adjustable vacuum relief valve
    - Vacuum gauge
    - BHJ High Performance Harmonic Balancer
    - Moroso HTD Drive Pulley
    - Moroso HTD Pump Pulley
    - HTD Belt
    - Custom Drive mandrel
    - Custom HTD PS pump pulley
    - Pump Idler tensioner with bracket



    AN fittings & braided line is extra cost. But we can get fittings at good prices (Around $30NZD a fitting)



    Last edited by Bazda; 24-10-2013 at 05:18 PM.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  2. #2
    Junior Member Carport Converter Billzilla's Avatar
    Join Date
    Dec 2005
    Location
    QLD
    Posts
    1,427

    Default Re: Interest in Dry sump kit 4age/7age Group Buy

    Interested!
    Though unsurprisingly I don't need the full kit.
    Just the pump (only with the scavenge sections please), the tank, the sump, and the pulleys & belt please.
    www.billzilla.org
    Toymods founding member #3

  3. #3
    Toymods Board Member Grease Monkey HJ60's Avatar
    Join Date
    Aug 2008
    Location
    NSW
    Posts
    54

    Default Re: Interest in Dry sump kit 4age/7age Group Buy

    Any Plans to make anything similar for the 3SGE Blacktop Beams motors ? ^.^ More Sump Clearance would be lovely! Not to mention the other advantages of a Dry Sump.

  4. #4
    Forum Member 1st year Apprentice
    Join Date
    Feb 2011
    Location
    sa
    Posts
    40

    Default Re: Interest in Dry sump kit 4age/7age Group Buy

    awesome idea!

    would be all over it if it was beams though

  5. #5
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: Interest in Dry sump kit 4age/7age Group Buy

    Quote Originally Posted by Billzilla View Post
    Interested!
    Though unsurprisingly I don't need the full kit.
    Just the pump (only with the scavenge sections please), the tank, the sump, and the pulleys & belt please.
    So you want the pump but not a complete one, therefore it would be open..or do you want a complete scavenge section which you can attach the pulley to. Im assuming you have another external pump?

    Quote Originally Posted by HJ60 View Post
    Any Plans to make anything similar for the 3SGE Blacktop Beams motors ? ^.^ More Sump Clearance would be lovely! Not to mention the other advantages of a Dry Sump.
    Quote Originally Posted by ke_70 View Post
    awesome idea!

    would be all over it if it was beams though
    As for 3sge - We will be working on this kit after we complete the 4age kits, then moving right through the Toyota range of engines!
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  6. #6
    Junior Member Carport Converter Billzilla's Avatar
    Join Date
    Dec 2005
    Location
    QLD
    Posts
    1,427

    Default Re: Interest in Dry sump kit 4age/7age Group Buy

    Quote Originally Posted by Bazda View Post
    So you want the pump but not a complete one, therefore it would be open..or do you want a complete scavenge section which you can attach the pulley to. Im assuming you have another external pump?
    Just the scavenge sections, all sealed-up with a pullet drive on the front. I'll be using the factory oil pump for pressure.
    www.billzilla.org
    Toymods founding member #3

  7. #7
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: Interest in Dry sump kit 4age/7age Group Buy

    Quote Originally Posted by Billzilla View Post
    Just the scavenge sections, all sealed-up with a pullet drive on the front. I'll be using the factory oil pump for pressure.
    Interesting.
    I will need a get a price on that. Dual scavenge pump. Do you need a mounting plate or you will be doing that your self?
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  8. #8
    Toymods Board Member Grease Monkey HJ60's Avatar
    Join Date
    Aug 2008
    Location
    NSW
    Posts
    54

    Default Re: Interest in Dry sump kit 4age/7age Group Buy

    Quote Originally Posted by Bazda View Post
    As for 3sge - We will be working on this kit after we complete the 4age kits, then moving right through the Toyota range of engines!
    I like this! Awesome work!

  9. #9
    Junior Member Carport Converter Billzilla's Avatar
    Join Date
    Dec 2005
    Location
    QLD
    Posts
    1,427

    Default Re: Interest in Dry sump kit 4age/7age Group Buy

    Quote Originally Posted by Bazda View Post
    Interesting.
    I will need a get a price on that. Dual scavenge pump. Do you need a mounting plate or you will be doing that your self?
    I assumed your same mounting plates would fit ... ?
    I can make them up if need be though.
    www.billzilla.org
    Toymods founding member #3

  10. #10
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: Interest in Dry sump kit 4age/7age Group Buy

    Quote Originally Posted by ke_70 View Post
    awesome idea!

    would be all over it if it was beams though
    Quote Originally Posted by HJ60 View Post
    Any Plans to make anything similar for the 3SGE Blacktop Beams motors ? ^.^ More Sump Clearance would be lovely! Not to mention the other advantages of a Dry Sump.
    Guys actually looking at this we can do a 3sgte Moroso dry sump. Not sure if its the same bolt pattern as the beams??
    The kit would basically be the same but we dont have a bracket to mount the pump as we dont have a block with all the accessories installed to make one to suit.

    So if the pans are the same bolt pattern etc I can do the kit minus the mounting bracket for the pump.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  11. #11
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: Dry Sump Kit 4age/7age Group Buy

    Bump, all this is under way. Parts are all on order!

    Once I get them all then time to make the brackets and the PS drive pulley.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  12. #12
    Toymods Club Member Backyard Mechanic Big T's Avatar
    Join Date
    Aug 2005
    Location
    NSW
    Posts
    230

    Default Re: Dry Sump Kit 4age/7age Group Buy

    Hey mate,

    How are these coming along? Can your mounting plate be used without the PS bracket? How would the tension on the belt be adjusted without it? I need bits and pieces as I've already sourced a Ross pulley with HTD drive. Need:

    - 3 Stage custom made dry sump pump made in USA
    - Pump bracket
    - Custom Moroso sump with -12AN ports
    - 2 Gallon Peterson aluminium tank with brackets
    - 2x -12AN Moroso Screen filters
    - Moroso breather Can
    - Moroso adjustable vacuum relief valve
    - Vacuum gauge
    - Moroso HTD Pump Pulley

    Can you send me a price for these bits? Cheers.

    Have you also thought about making a replacement oil pump section? Saves having to gut and seal up the stock oil pump.

    Eddie.
    4agte finally completed. 234rwkw @ 8125rpm. Tis fun

  13. #13
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: Dry Sump Kit 4age/7age Group Buy

    Quote Originally Posted by Big T View Post
    Hey mate,

    How are these coming along? Can your mounting plate be used without the PS bracket? How would the tension on the belt be adjusted without it? I need bits and pieces as I've already sourced a Ross pulley with HTD drive. Need:

    - 3 Stage custom made dry sump pump made in USA
    - Pump bracket
    - Custom Moroso sump with -12AN ports
    - 2 Gallon Peterson aluminium tank with brackets
    - 2x -12AN Moroso Screen filters
    - Moroso breather Can
    - Moroso adjustable vacuum relief valve
    - Vacuum gauge
    - Moroso HTD Pump Pulley

    Can you send me a price for these bits? Cheers.

    Have you also thought about making a replacement oil pump section? Saves having to gut and seal up the stock oil pump.

    Eddie.
    Hey, yes we will be doing kits without the PS as well.
    The pump is adjustable like the Alternator or PS pump, has slotted holes. Also the idler pulley is also adjustable, im also thinking of putting a spring on this so it keeps the same tension all the time.

    With the bracket only thing is, made to suit the off set of our setup, so might not 100% line up with the way the ross one is setup. Id need some dimensions from you. But we can supply all those parts no worries.

    As for pump block off, we will supply the parts to block it off. Basically just a alloy rod when you press into the cover to block off the hole.

    Will PM you price.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  14. #14
    Forum Sponsor Domestic Engineer Bazda's Avatar
    Join Date
    Jul 2008
    Location
    Auckland
    Posts
    556

    Default Re: Dry Sump Kit 4age/7age Group Buy

    Dry sump pumps are here, time to fabricate some billet brackets!
    Moroso has just finished up the pan drawings, awaiting the final copy to approve.
    1988 Toyota Levin GTZ 10.88 @ 209.57 340kw
    Now 9AGTE 410kw atw
    www.mrpltd.co.nz - Manon Racing Products
    Turbonetics|Custom Coilovers|4/6 Piston custom brake kits|Twin/Triple custom clutch setups|+ MORE
    www.facebook.com/mrpltd - LIKE
    Check out the Toymods Sponsors section for Deals

  15. #15
    Toymods Club Member Backyard Mechanic Big T's Avatar
    Join Date
    Aug 2005
    Location
    NSW
    Posts
    230

    Default Re: Dry Sump Kit 4age/7age Group Buy

    Update? Are these complete yet?

Similar Threads

  1. MRP 7age/9age 1900cc Stroker Kit
    By Bazda in forum MRP LTD - Manon Racing Products
    Replies: 269
    Last Post: 18-09-2017, 09:18 AM
  2. Moroso 4age baffled sump group buy
    By Bazda in forum MRP LTD - Manon Racing Products
    Replies: 54
    Last Post: 11-11-2013, 12:24 PM
  3. 4AGE / 7AGE not making power
    By 70XIN in forum Tech and Conversions
    Replies: 7
    Last Post: 21-08-2011, 07:06 PM
  4. Replies: 15
    Last Post: 01-01-2011, 05:42 PM
  5. coilover helper springs - group buy interest?
    By brett_celicacoupe in forum Tech and Conversions
    Replies: 52
    Last Post: 17-10-2008, 07:39 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •