I'd use a Tremac, few adapters getting around and they are very strong, fairly new (i.e much younger than R154's...) and also reasonably plentiful, therefore cheaper than R154's...
Hi All
I'm having the 2JZGTE from Ariso in my R32GTsT with A340E & plan to manual transmission.
Since R154 is very difficult to get Iplan swap the RB25det transmission in my 2JZ engine.
I need advise & concern before the project begin. Thanks in advance
I'd use a Tremac, few adapters getting around and they are very strong, fairly new (i.e much younger than R154's...) and also reasonably plentiful, therefore cheaper than R154's...
With a tremec, what would you do for clutch and flywheel, and matching different splines?
nissan box's are pretty weak, well they are behind nissan motors haha.
sticking a tremec behind a 2j, youd need to call up a clutch shop and get them to supply you a pressure plate to suit your fly wheel, or a new flywheel, and clutch disk with tremec splines. i dont know if the shifter position will line up with the original shifter hole in the car.
the tremec im fitting to a car at the mo, uses an internal clutch slave/thrust bearing. you just have to set it up.
youll need a bell housing too, or adapter plate.
i dont have a funny or cool signature.
Bookmarks