1j s13 help

[r00t3R]

G,day
im in the process of a 1jzgte into 180sx conversion and am stuck on a few things,well not realy stuck just need a bit of spiritual guidance, if ya know what i mean.

The engine is in resting on a set of helps mounts and looks to be sitting perfect, i just need to know.
- what sway bar will clear the front sump of the 1j without modification( i heard the ca18 swaybar may fit). varification would be helpfull.
- what clutch master cylinder can i use " if any " that will not hit on the rear turbo. i know u can move the master cylinder to the inside of the car but want to avoid this if possible.

heaps of people have done this conversion so i know the answers are out there and if anyone could shed some light on this situation it would be much appreciated.

Cheers.

[mr1jz]

Cant help with the sway mate but I used a s14 clutch master when I did a rb25 conversion.

[r00t3R]

thanks mate ill check that out now

[Valkyrie]

My brothers 180SX/1JZ - 1jz 180sx - Hardtuned.net - Page 2

He used a CA18/S13 clutch cylinder.