Results 1 to 2 of 2

Thread: Seeking advise on a good 4 speed Toyota manual box for a 2.8L Toyota Crown

  1. #1
    Forum Member 1st year Apprentice
    Join Date
    Jun 2011
    Location
    Queensland
    Posts
    8

    Default Seeking advise on a good 4 speed Toyota manual box for a 2.8L Toyota Crown

    I have a fully rebuild 2.6L Toyota Crown engine with an automatic transmision that we are using in our retro rod project and I would love to use a 4 or a 5 speed manual transmision instead.
    The box will need to be as short as possible and since its going in a 46 Dodge pickup I'd say the 4 speed would be suitable but if the 5 speeds are available in a short box then that would also be doable.
    Any assistance would be greatly appreciated.
    Fred
    Step right up chum and watch the kid lay down a rubber road right to freedom.

  2. #2
    Is a Chief Engine Builder wilbo666's Avatar
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    3,468

    Default Re: Seeking advise on a good 4 speed Toyota manual box for a 2.8L Toyota Crown

    Ed's site has a fait bit of info.
    Wxx Gearbox Specifications

    But to summarize they are all about the same length. W40, W50, W55, W57, W58 would all be options for you I would think

    Cheers
    Wilbo
    Wilbo's Wiki (Includes 2JZ-GTE Wiring, etc! )

    Wilbo's JZA80
    Wilbo's JZZ12

Similar Threads

  1. Toyota Crown 3 speed overdrive dramas.
    By Just1n_mc in forum Tech and Conversions
    Replies: 5
    Last Post: 18-02-2010, 08:13 PM
  2. Toyota Crown 3 speed auto to 5mge engine
    By 1975ToyotaCrown in forum Engine & Driveline Conversions
    Replies: 8
    Last Post: 19-03-2009, 09:22 AM
  3. 1983 Crown + 7m-gte 5 speed good or bad idea?
    By LeaThaL in forum Tech and Conversions
    Replies: 15
    Last Post: 24-10-2006, 06:52 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •