pavtek in lalor are good
berryman engines out in moorabbin are also good
Guys, im starting to chase down some quotes on some machining work i want done for a new engine, whos the the guys to talk to?
who have you delt with before? whos good? whos bad?
Cheers
Rohan
pavtek in lalor are good
berryman engines out in moorabbin are also good
Crankshaft Rebuilders in Mitcham are good, best on the east side i would say.
-Chris | Garage takai - Breaking cars since 1998
Sparky - AE86 IPRA Racer | RZN149 Hilux - Parts and Car Hauler
I never saw a wild thing sorry for itself. A small bird will drop frozen dead from a bough without ever having felt sorry for itself. - D.H.Lawrence
I have used HEADTECH before, can't remember what suburb they are in but i do remember how to get there...
They are just of the westgate freeway i think you get off at millers rd, and they are right near the mobil plant up there..
1UZ-FE cressida :-)
Give Sean a call at CW engines. 9873 3800
He has been building my engine and the work they have done and the prices are awesome.
Jeremy
Motor Improvements - St Kilda Rd, Elsernwick.
Can do all machining, headwork, shim up head.........great work, good prices, nice guys and will build an engine from scratch if u want
I had all my 3sge machine work done at Footscray Engine Reconditioning (used to be Repco) They do a good job at machining 9689 3211
I have delt with "Motor Improvements" for my dry sump oil pump - they are very helpful.
You might try even GM, repco deals with them (where i work) and seems to do well,
But for some reason they have taken 3 tries to get my mates 3sge to be non problematic, there was pieces metal in the combustion chamber!
Haha so are you recommending them or not?!Originally Posted by trd-st162
Don't think we can say anything bad about any workshops here can we?
Its beating around the bush hehe.
U might have more luck with them!
1993 Toyota Celica SX - WRC TROPHY MODEL!
Nah its just that I wouldnt take my engine to somewhere that took 3 goes to get an engine going, especially with metal in the combustion chamber!!
my best mate worked for pavtec for like 7years there top notch i think it's on high street
also true line on mount road moonie pounds are pretty sick there old skoolish but they know what there doing
X2 rohan. that is where is was going to take it and that is where michael took his. they build single cam 2T and 3T's for open wheeler race cars Prices were also alot better compared to orger engines in bayswater tooOriginally Posted by StuC
ive used crankshaft rebuilders. takai - i think they're closer to blackburn than mitcham they are located in cottage st.
*hearts* his 4age powered KE70 Panelvan!
Hi, Im enthused about corollas..
Rohan what exactly are you looking at getting done ?
std pricing for bore & hone is about $25 a hole
headwork can get expensive depending on what you want done
Bookmarks