2JZ-ECU Harness Repair - 40Pin Plug Pin Swaping

[auto351]

HI,

During our Aristo 2JZ into MA61 swap we have found missing pins for automatic controled Trans.(A340L) on the 40pin ECU plug. (small one in the below image).

So I wanted to know if anyone have swapped the plug from one terminal and transfered it to another. and how its done?


[/QUOTE]
Thank you Nat for this image

[wilbo666]

Take the yellow covers off (they should clip / pop off), and then just unpin as per normal..



Cheers
Wilbo

[auto351]

Thanks willbo

[aristoman]

You got it now. Did you require the body plug to run ?

[auto351]

ya, we wired in the body plug with Wilbo666 write up http://www.toymods.org.au/forums/sho...ilbo666+aristo

The only thing we didnt we working was the overdrive disable, We are not sure if this was available on this model anyway