Brakes-need HQ holen on ke55

**gazza** · 20-04-2011, 11:29 AM

i need to get HQ holden stud pattern on the front of my ke55.i had a bit of a search and somone said the hq rotor will bolt straight on.i dont know what strut it was though or the caliper they used.any ideas?

**Cuzzo** · 20-04-2011, 01:50 PM

Why do you need hq pattern?

bearings are they same between the HQ and the ra65 / xt130.

A mate has a big brake setup using hq stud pattern. Is that something you want to purchase?
Nissan r33 calipers on hq rotor.

**gazza** · 20-04-2011, 03:47 PM

i need hq pattern because thats what the diff is and its what my wheels are.i may be interested in our mates set-up

**Cuzzo** · 20-04-2011, 04:00 PM

ill get prices and specs for ya.

**gazza** · 02-05-2011, 04:05 PM

waiting

**Cuzzo** · 02-05-2011, 04:25 PM

Yeah me too....ive asked him but hes a little sidetracked with the new car.

Ill get him to this thread so im not playing middle man.

Cheers.

**TIMTAMS** · 03-05-2011, 11:24 AM

Well here I am... Now what?

**Cuzzo** · 03-05-2011, 11:33 AM

Gazza wants to know if you would like to sell your front brake setup.

If so how much.

**TIMTAMS** · 03-05-2011, 12:06 PM

Hopefully gazza is seated! To do it was alot of fab work to get it to work properly was also expensive. The front struts without the koni inserts owe me $3000. I will itemise it when I get mote time.

Basically
XT130 struts
Rx7 s4 calipers widened and heavily modified to fit under 15" rims
Braided lines
Ds3000 ferodo pads ( fuckin awesome)
Adapter brackets to mount caliper cnc'd
Coilover conversion
Springs etc
Adj tops
Koni inserts
Stops on a dime

Would I do it again... No
Why... Too expensive
Will I change it? Doubt it
Does it work? Amazingly

**TIMTAMS** · 03-05-2011, 12:14 PM

http://www.toymods.org.au/forums/sho...S-videos/page3

**gazza** · 03-05-2011, 12:56 PM

ouch. that hurts! i can get a hoppers stoppers kit in hq pattern for around a grand. if it was a circuit car i'd spend bigger but this thing is only good in a straight line