could easily get one machined up out of brass? (i can analyse it to tell you what kind of brass)
Hi all after pulling a MS112 pwr steer box a few years ago, moved state and house a few times I have now gone to use it. It turns out the olive from the pressure line has fallen out. So now I need one to run a nice neat set up in the wagon
It looks like this
Its 9mm high
small height is 3.7mm
Largest diameter is 12.97mm
Smallest dia is 7.9mm
Internal Diameter is 5.9mm
So question is where can I get one from, or have you seen one in a Toyota I can get one from
Thanks
Stitt
ST177 UZS131 Crown Royal 'G' the pimping limo like daily 1UZFE 144rwkw
DST17T MS53 68 Crown Custom Wagon 7MGTE 266rwkw
could easily get one machined up out of brass? (i can analyse it to tell you what kind of brass)
"I'm a Teaspoon, not a mechanic"
"There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)
AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!
Yeah that was plan B
ST177 UZS131 Crown Royal 'G' the pimping limo like daily 1UZFE 144rwkw
DST17T MS53 68 Crown Custom Wagon 7MGTE 266rwkw
pirtek enzed any hydraulic hose place
- ma61 + 2jz-gte + v160 + 3.5 torsen
pick-n-pull, wreckers, from anything that's aluminum with a flared piece of tubing going into like steering rack & auto trans. The material shouldn't be important or its exact fit
hydraulic hose place[/QUOTE]
'I've scrapped better.' John stated when asked about the car by the guy with the silver tipped cowboy boots!
Bookmarks