Results 1 to 2 of 2

Thread: FMIC ducting for a mkiv supra

  1. #1
    Forum Member Grease Monkey
    Join Date
    Jan 2010
    Location
    ACT
    Posts
    142

    Default FMIC ducting for a mkiv supra

    Hi guys,

    I've been noticing my water temps rising up to 100 degrees. Speaking with the natrad guys and my tuner everything is fine and those temps should be expected while giving the car a boot full on a hot day.

    Whilst trolling a few forums i came across this.

    http://www.mkivsupra.net/vbb/showthr...ucting-install

    I was wondering if i put this on the front and then continued the ducting through to the radiator would this work?

    I currently have a 135mm thick intercooler core -gap-ac condensor-small gap-aluminium radiator with a AAP fan shroud and dual thermos.

    I was also looking at throwing a push SPAL fan on the front of the ac condensor to get a bit mor air flow in the radiator from the front.

    views or opinions would be great!
    Stock NA JZA80

    "Never drive faster than your angel can fly." - Boyd Graham 'ASSAIL' R.I.P

  2. #2
    Forum Member Grease Monkey
    Join Date
    Jan 2010
    Location
    ACT
    Posts
    142

    Default Re: FMIC ducting for a mkiv supra

    Stock NA JZA80

    "Never drive faster than your angel can fly." - Boyd Graham 'ASSAIL' R.I.P

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •