3-channel "dumb" igniter

[JustCallMeOrlando]

What'd you use for the Falcon setup Paul?

[camrygt?]

What'd you use for the Falcon setup Paul?

I couldn't find anything at wreakers around here that would work (like wrx, or v6 camry) I asked about a new V6 camry one (genuine) but they were very expensive
I wanted something I new was common/reliable so I used 3 single Ignitors from 4cyl widebody camry 93ish or late sv21, celicas corrolla etc all use similar ones as well.

They have the tacho output on them as well which can be handy but you won't need that the Adaptronic will do all that for you on one its outputs

[gixer]

008's have internal dwell, just a note when getting them off camira's, one camira set up used a hall effect trigger and the other a reluctor, the modules are different(and this is in the same model).

[CrUZida]

Carby Camira's use 008's.
Bosch EFI Camira's use 124's.

As long as you have 3 of the same type, and the ecu configured to work with them, all will be good.

[gixer]

Ah thanks for that never really taken any notice of the engines they came off.

[craigy]

Heres a part number an wiring diagram for the 008 camira ignitor
hope it helps

Cheers
Craigy

http://www.motec.com.au/drawings/m11.pdf

[The Witzl]

THe Nissan RB series ignitors are the go - 110% dumb, no dwell control, just 6 inputs and 6 outputs and that's kinda it really.

You dont need to use all 6 either - teh massif BvD is using an RB25 ignitor for his 7mgte wasted spark coils with the Autronic SM4.
They are literally a 6-way Darlington transistor array, precisely what you are after by the sounds of it.

[JustCallMeOrlando]

Shall have to have a look at one then! Thanks teh Witzl.