Toymods Dyno Day 13 - Sunday, July 2nd

[Expeditious]

Some thing is telling me the 2jz shall be there FTW, we will just have to wait and see

[Alchemist]

Some thing is telling me the 2jz shall be there FTW, we will just have to wait and see

Yea but you've got inside information

[Expeditious]

Yea but you've got inside information

Yes but that is classified information, which I will not expose

[RONA]

I think Waynes 2J will pull 140RWKW+ and Rona's will be around the same, if Ed wasn't such a crazy bastard when he ported it I don't think it would be as close as it's going to be.

I'm guessing I'll be around 130RWKW, so quite off the pace, and that's if I bother running but I'll be there

I'm willing to be Rona knows his power at the moment, I mean who gets a Dyno tune and doesn't ask "how much?" he's just sitting on the numbers.....

Dude i posted the sheet it says 112.9rwkw on it, that was in 4th it made 110.7rwkw in 3rd that is all it could do .

Oh and Expeditous tell Wayne to bring the MA61 to WSID on the 21st of June I'm thinking of going. None of the dyno stuff lets see the difference between power and torque/power curve.

[Alchemist]

Dude i posted the sheet it says 112.9rwkw on it, that was in 4th it made 110.7rwkw in 3rd that is all it could do .

Oh and Expeditous tell Wayne to bring the MA61 to WSID on the 21st of June I'm thinking of going. None of the dyno stuff lets see the difference between power and torque/power curve.

My apologies mate, I'm not subscibed to your Members Rides thread so didn't see it.

I dunno, Waynes car already ran a 14.6, which was bloody fast, but still, would love to see them both out there!

[RONA]

My apologies mate, I'm not subscibed to your Members Rides thread so didn't see it.

I dunno, Waynes car already ran a 14.6, which was bloody fast, but still, would love to see them both out there!

I hadn't updated the members ride thread yet only the MA61 dedicated thread, members ride in the club section has been updated with dyno sheet and vid.

[BlackSupra]

Oh and Expeditous tell Wayne to bring the MA61 to WSID on the 21st of June I'm thinking of going. None of the dyno stuff lets see the difference between power and torque/power curve.

Rona, bring YOUR MA61 to WSID on the 5th of July I'm thinking of going. None of the dyno stuff lets see the difference between power and torque/power curve.

[RONA]

Rona, bring YOUR MA61 to WSID on the 5th of July I'm thinking of going. None of the dyno stuff lets see the difference between power and torque/power curve.

Can't do mang got work, only reason I can do the 21st is cos I have time off for studying and after a full day studying I think I deserve to relieve some stress.

Question do I need an overflow bottle for the radiator to run at WSID

[Classique71]

he was only wearing his hat forward for that run

with ronas hat backward - its bound to crack 150 FTW!

[Alchemist]

Just a comparison of the curves for you, the red is the 7M, blue is 2J, Rona your scan was at 100% so helped make this a little easier.

Bear in mind the scales are different and it's not a totally acurate representation, but curve is a good rough indicator. So yours is very nice and flat!

[Alchemist]

Question do I need an overflow bottle for the radiator to run at WSID

Last time I went there, and it kinda shocks me to say it, but I went in for scrutineering and popped my bonet and the guy was like "nah, don't worry about that mate, takes too long", and proceeded to close my bonet before he'd even looked under it. He never actually checked my throttle return, or anything else for that matter They also didn't check my rego papers.

So best to turn up to WSID in a stolen car, with a stupidly modded motor and nobody would care, but that's way off topic...

[RONA]

AFR's are about 13 at idle and progressively go down to 12 in the top end. This is a moot point for me though as it made the same power with less fuel and mroe timing etc but its far safer. Adam stated that the car will run leaner on the street then on the dyno though so whilst it seems fairly rich its not that bad.

Didn't seem to be blowing fuel smoke on the dyno, regardless i'll get the afr's when its on the SAS one. Pretty sure the 3rd gear run had the afr's on it but the 4th gear run pictured is power and torque only.

[Expeditious]

Rona, bring YOUR MA61 to WSID on the 5th of July I'm thinking of going. None of the dyno stuff lets see the difference between power and torque/power curve.

Well said blacksupra, Rona I do recall Glen saying Wayne's MA61 ran a 14.68 when it was only putting out 120rwkw at the time... Id love to know what it is capable of now

[Andrew162]

Question do I need an overflow bottle for the radiator to run at WSID

YesIn10Char's.

[PHOBIA]

PHOBIA is booked in on the 26th at SAS for a few minor tweaks after having the head of it again. Cutting it a bit fine for Dyno Day 13 but all going well I’ll be there with a reliable 22R-E.