4age conrods

[Animal15]

I was Wondering con-rods with Big End Bore 43mm (1.693") gonna fit to 4AGE Big-port crank ? (i think 40mm one)...

(I did some research on aftermarket con-rods they all come in either 43mm or 45mm but from my memory even later model cranks are 42mm.)

[oldcorollas]

big end of rod and crank need to be the same size.....

43 or 45mm? they would need larger cranks..

or, they are talking size before addign bearings?

[Animal15]

Thats wht i wanna make sure.............

when i e-mailed them they send me this link

http://belfabracing.com/index.php?ma...&products_id=3

small end size is right 18mm which fit to my pistons,

is it's before adding bearings do i have to get bearings from same brand?

(I'm bit new this rebuild business, wanna know exactly before i spend my money on them)

[oldcorollas]

being 43mm, they are probably allowing 3mm or both bearign halves, and so they would be for a 40mm crank
45mm big end bore, with 3mm of bearings = 42mm crank.
make sense?

[Animal15]

aha thnx man. i thnk OEM Bearings gonna be ok.