4age into ta23, gbox xmember, random questions

[Cob604]

hey. i put a 4age into my ta23
1. im using 10mm flat plate just to hold the gearbox in.
the plate is sagging a bit and is only held on by 2 bolts of 4 bolts onto body.
im after a diagram or something so i can make one to get it enginerred. or a interchangeable one.
i can make my current one again making it larger so its held on by 4 bolts and strebghteb it somehow if i have to.

2. anyone know where to get new suspension rubbers eg swaybar, insulator ring, panhard rod.

3.is the standard panhard rod bent from factory to clear the diff?

4. is there a blinker that can be used to replace the guard one using the current mounting holes?

5. has anyone bent their accelerator pedal to make the pedals level?


thanks heaps

["Z" UTE]

Cob604, 1. replace your flat plate with 1 3/4" angle iron. 2. Pedders can supply all the bits as can most suspension shops. 3.The panhard rod stocko is straight as an arrow. 4. Apparently the VT Commonwhore ones fit, just have to add an earth wire to the commy plug. 5. I use a floating pedal from a Corona/Supra/Crown, these can easily be "bent" to suit your requirements.

cheers Chuck.

[parrot]

Not mine, but might give you some ideas.

[Cob604]

thanks heaps guys +rep,

1. that xmember is very simple, it might do the trick.

3. my panhard rod is bent right behind the diff, could it have been bent for a reason eg sit lower. or has the diff come back and bent it?

6. how do i mount new speco guages in my standard dash, i see they have brackets to hold them but can they be mounted in the factory position?