Results 1 to 2 of 2

Thread: 5M-E mod

  1. #1
    workin on it 1st year Apprentice
    Join Date
    May 2009
    Location
    NSW
    Posts
    26

    Default 5M-E mod

    considering using an old 5m-e as an engine in a small ski boat instead of the typical 202 holden red motor...so because its injected, what will i need to do wiring wise to get the shizzle happening??
    "My little 'rolla could flog your 3lt rodeo" (now have photo to prove it. my 86' rolla pulled my mates 2x4 3lt out of a bog)

  2. #2
    Toymods V8 Member Too Much Toyota CrUZida's Avatar
    Join Date
    Aug 2005
    Location
    WA
    Posts
    8,214

    Default Re: 5M-E mod

    Very little, its a pretty simple electronics system.

    There are a few threads around (one very recently) that have the 5M-E wiring diagrams in them.

    You'll probably need to provide power to maybe 4 wires, earth a couple more.

    Fuel pump wiring you can either do hardwired through the oil pressure switch, or run it through the AFM as per normal.
    Peewee
    1985 MZ12 Soarer - 1UZ Powered
    2013 86 GTS

Similar Threads

  1. Sams MA61 7MGTE Conversion Guide
    By Negative Boost in forum Engine & Driveline Conversions
    Replies: 21
    Last Post: 08-07-2015, 12:12 AM
  2. 5M E to 5M GE/6M GE Conversion Guide
    By spiller in forum Engine & Driveline Conversions
    Replies: 16
    Last Post: 29-11-2011, 01:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •