Superstrut front pads are the same as SW21 front pads.
Hi,
Just need some part numbers and source details as follows:
JDM Toyota Trueno AE101 Super Strut:
- Can anyone tell me the front ABS sensor part number?
- Does anyone know if the sensor was in a AUD delivered car?
- Is there an off the shelf slotted front brake disc rotor I can buy and DBA/RDA part number if possible?
- part numbers for brake pads for the SS calipers (Bendix etc)?
I have read about modifying some discs but surely by now someone has them off the shelf?
JDM Toyota Levin AE111 non super strut:
- part numbers for brake pads for the non SS calipers (Bendix etc)?
- Is there an off the shelf slotted/standard front brake disc rotor I can buy and DBA/RDA part number if possible?
- is the brake disc rotor the same as the ADM corolla's (ae111, ae101 & ae92)?
I need the AE111 part numbers fairly urgently!
Thanks!
Superstrut front pads are the same as SW21 front pads.
AE101 GTZ Levin
Front LH speed sensor - 89543-12031
Front RH speed sensor - 89542-12031
Those sensors are specific to the AE101 GTZ, GT-Apex and 3 door GT Corollas. Best bet is to get the one you need from a front cut.
Pads:
Are the same as an SW20 MR2.
Endless SSS: EP278SSS (I only have that part number on me)
Rotors:
OEM - 43512-12411
Dixcel slotted - 311 9001 (direct fit)
DBA - DBA759
RDA - RDA7784 (add an S to the end for slotted)
The DBA and RDA numbers are for the ZZE123 Sportivo and fit the superstrut, but you will just have to put 1.5mm washers on each stud behind the rotor to space it out correctly.
I haven't tried this personally, I'm upgrading my super strut to 4 pot Willwood calipers so I haven't needed to go any further than measuring the stock rotors.
The rear pads and rotors will be the same as the Australian model.
Pads:
Endless SSS: EP133SSS (I only have that part number on me).
Rotors:
DBA - DBA 710
RDA - RDA 710
Project u - SPPT203-s6
Dixcel - 315 9004 (add an S to the end for slotted)
The front Levin non-superstrut (macpherson strut) setup is exactly the same as the corresponding Australian model. Ie, if the part fits the Australian AE101/102/111/112 front suspension/brakes, it will fit your AE111 Levin macpherson strut front suspension.
Hope that helps.
Last edited by TERRA Operative; 21-07-2010 at 10:22 PM.
AE102 - Charlene the Old Faithful, Reborn
JZZ30 - Lexi the Spacecruiser, 1JZGTE>>3SGE. 200rwkw, hunting Skylines and n00bs in SS Commodores
ST162 - Charlie the non-ghey Celica, 3SGE>>4AGE. GOOOOOOOONE
AE82 - Rosie the Bitsa from Hell, 70.8kw atw. Has been converted into garage space and money at last
KE55 - Billie the Beast, sadly missed
Thanks Terra and Hiro.
Bookmarks