Reply With Quote#6201-2RS
ID:12mm
OD:32mm
Thick:10mm
7m sipgot bearing size??
heya peeps
just after the size of the spigot bearing in a 7m. dont really need a part number, just the ID/OD and depth of the bearing... need to see if we can get a bearing to accommodate a 19mm input shaft spigot in there!
cheers
ed
../delete/ban
tech moderator
E46 M3 Nürburgring Nordschleife - 8.38
Re: 7m sipgot bearing size??
#6201-2RS
ID:12mm
OD:32mm
Thick:10mm
Now - 1988 GX81 Mark II- 7MGTE, GT35R, TiAL 44m, Microtech, 550cc injectors, R154, Xtreme clutch, LSD.... Low boost tune done = 330rwhp@1 BAR...
Then - 1989 MX83 - The big scrap heap in the sky...
Re: 7m sipgot bearing size??
thanks
ed.
../delete/ban
tech moderator
E46 M3 Nürburgring Nordschleife - 8.38
Re: 7m sipgot bearing size??
19mm input shaft!? WTF are you using Ed?
Teh UZA80 - Project Century - Remotely p00'd by association
Re: 7m sipgot bearing size??
quaife 6sp sexquential. only comes with input shaft for a viper
might need to grind it down to 15mm and use that bearing you dug out for the t56
../delete/ban
tech moderator
E46 M3 Nürburgring Nordschleife - 8.38
Re: 7m sipgot bearing size??
Ahh, fair enough. Thought it would be that, 19mm is HUGE though
Teh UZA80 - Project Century - Remotely p00'd by association
Re: 7m sipgot bearing size??
ed, try callling a bearing place and giving them the dimensions. may just get lucky
EDIT: just gone through all the catalogues i have/can find (out of curiosity) and there is nothing particularly close available...
linky if anyone wants one http://www.vxb.com/page/bearings/CTGY/17mm
Last edited by twiztd; 12-07-2010 at 03:22 PM.
Now - 1988 GX81 Mark II- 7MGTE, GT35R, TiAL 44m, Microtech, 550cc injectors, R154, Xtreme clutch, LSD.... Low boost tune done = 330rwhp@1 BAR...
Then - 1989 MX83 - The big scrap heap in the sky...
Posting Permissions
Bookmarks