Length of TA22 tailshaft

[TurboRA28]

Hi all, does anyone have a TA22 tailshaft lying around that they can measure the total length for me? Auto and manual I would be interested in both.
Thanks
Joel.

[TurboRA28]

Sorry actually only manual.. As if it's right it has to go into a T50 box.

[old_school_jap1]

That looks like an AE86 T50 you are using. They have a 22 spline output shaft, whereas the earlier TA22 T50s have 20 spline output shafts.

[ta22fan]

I've got two in the shed, both for manual box. Just measured them both from the face plate that joins to the diff to the end of the spline shaft. Both are 1365mm to within 1mm. I've got an auto shaft also, but it's still fitted to one of my parts TA22s.

Paul

[TurboRA28]

Yeah need to suit a T50 from AE86 so maybe TA22 no good eh..

[Scoobzd]

You just need the front yoke and a new uni joint - Simple as...

[TurboRA28]

TA22 sounds like perfect length.. But would need the 22 spline yoke.. So that is an easy swap over is it?