Reply With Quote..try this....it should hopefully explain
http://www.toymods.org.au/forums/sho...ber+connection
2TC 3TC Carburettor and Fuel Pump Lines
Does anyone know the fuel connections for a 2T/3T fuel pump and carburettor?
The inlet for the carburettor.
The inlet and outlet of the fuel pump
I've labeled the connections:
Last edited by brucey; 25-05-2010 at 10:15 PM.
Re: 2TC 3TC Carburettor and Fuel Pump Lines
..try this....it should hopefully explain
http://www.toymods.org.au/forums/sho...ber+connection
“From the five years, 1968-73, if you were an F1 driver at that time, there was a very likely chance that you would have died.”
- Jackie Stewart
(now that's my type of racing)
Re: 2TC 3TC Carburettor and Fuel Pump Lines
The fuel pump pictured above has got three pipes.
So, pipe No. 3 is connected to fuel tank -> fuel filter line?
Pipe No. 1 goes to connection B?
Then from connection A to pipe 2 (the return line)?
Re: 2TC 3TC Carburettor and Fuel Pump Lines
i could be wrong but i think the fuel pump u have there is for a carby without a return line on it, as the fuel pump has one on it.
ill have a look at how mine was setup and see.
dan.
* 84 FJ60 - 37's, 308, 80 series coils/diffs and LS1TT in the makin
* 73 KE26 - x4 Brown Wagz
* 73 KE20 NOW 3T-TE
* 84 KE70 Panno
* MX83 LS1 Track Car
Re: 2TC 3TC Carburettor and Fuel Pump Lines
OK, that will be great.
I just had a look at your rides thread, and it looks like your fuel pump only has two connections:
http://www.toymods.org.au/forums/sho...?t=6516&page=4
Mines a 13T block so I guess the pumps/carby could be slightly different.
Re: 2TC 3TC Carburettor and Fuel Pump Lines
yep mine had the return on the craby, the other one looks like it had none, thus would of used the return on the fuel pump.
hope this helps a little
* 84 FJ60 - 37's, 308, 80 series coils/diffs and LS1TT in the makin
* 73 KE26 - x4 Brown Wagz
* 73 KE20 NOW 3T-TE
* 84 KE70 Panno
* MX83 LS1 Track Car
Posting Permissions
Bookmarks